No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a DDNS Client

Configuring a DDNS Client

A device functions as a DDNS client. When the IP address corresponding to the domain name changes, the DDNS client can notify the DNS server to update the mapping between the domain name and the IP address on the DNS server. This ensures that users can successfully access servers on the network using domain names.

Pre-configuration Tasks

Before configuring a DDNS client, complete the following tasks:
  • (Optional) Register on the DDNS server website.

    NOTE:
    The device functioning as the DDNS client supports the following update modes:
    • DDNS update mode (defined by the RFC2136): The DDNS client dynamically updates the mapping between domain names and IP addresses on the DNS server.
    • Update mode implemented through the DDNS server: The DDNS client sends the mapping between domain names and IP addresses to the DDNS server with a specified URL. The DDNS server then informs the DNS server to dynamically update the mapping between domain names and IP addresses.

    When using the update mode implemented through the DDNS server, the DDNS client must register on the DDNS server website. Currently, the device can be connected to the following DDNS servers: DDNS servers provided at www.3322.org, www.dyndns.com, and www.oray.cn, Siemens DDNS server, and HTTP-based common DDNS server.

    Authentication steps are implemented in the update process through DDNS servers. All DDNS servers except Siemens DDNS servers do not encrypt user passwords during the authentication. To improve security, you are advised to configure IPSec when using these DDNS servers to implement update. For details, see IPSec Configuration in the Huawei AR Series V200R010 Configuration Guide - VPN.

  • Configure a route between the device and the DDNS server or DNS server.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 79364

Downloads: 51

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next