No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Typical Networking of the DHCPv6 Relay Agent

Typical Networking of the DHCPv6 Relay Agent

Figure 9-12 shows a typical networking of the DHCPv6 relay agent.

Figure 9-12  Networking of the DHCPv6 relay agent

The device functions as a DHCPv6 relay agent, the client can communicate with a DHCPv6 server on another network segment through the DHCPv6 relay agent, and obtain an IPv6 address and other configuration parameters from the global address pool on the DHCP server. In this manner, DHCPv6 clients on multiple network segments can share one DHCPv6 server. This reduces costs and facilitates centralized management.

Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 80314

Downloads: 51

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next