No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for NAT

Licensing Requirements and Limitations for NAT

Involved Network Elements

Other network elements are not required.

Licensing Requirements

NAT is a basic feature of a router and is not under license control.

Feature Limitations

  • Among the AR550 series routers, the AR550-8FE-D-H, AR550-24FE-D-H do not support NAT.

  • By default, the route forwarding function is enabled on high-end LAN cards (8FE1GE, 24GE, and 24ES2GP). These cards do not send received IP packets to the CPU when the IP packets are forwarded on a LAN card. In this way, NAT services configured on VLANIF interfaces do not take effect.

Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 83513

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next