No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Planning Data

Planning Data

Planning DHCP Servers

A DHCP client broadcasts DHCP Discover messages and all devices on the network segment will receive these messages. When multiple DHCP servers or DHCP relay agents are deployed on a network segment, the client accepts only the first DHCP Offer message it receives and therefore may obtain an unexpected IP address. Planning DHCP servers helps you ensure that clients on your network obtain network parameters from an expected DHCP server.

When planning servers, note the following:

  • Plan VLANs to ensure that only one DHCP server (or a DHCP relay agent) can receive DHCP Discovery messages in a VLAN.

  • Configure DHCP snooping on client access devices to ensure that the clients apply to the correct DHCP servers for network parameters. For details about configuring DHCP snooping, see DHCP Snooping Configuration in the Huawei AR Series V200R010 Configuration Guide - Security.

Planning IP Addresses

Plan the range of IP addresses that can be allocated and the mechanisms (such as dynamic or static) used to allocate the IP addresses.

Plan the IP addresses that cannot be allocated from an address pool. For example, in an enterprise, a DHCP server allocates IP addresses on the network segment to employee PCs. On this network segment, has been used by a DNS server and must be excluded from the address pool to prevent IP address conflicts.

Planning Leases

Plan an IP address lease for a DHCP client based on the expected time that the client will be online. By default, the IP address lease is 1 day.

  • In scenarios where clients often move and stay online for a short period of time, for example, in cafes, airports, and hotels, plan a short-term lease to ensure that IP addresses are released quickly after the clients go offline.

  • In scenarios where clients seldom move and stay online for a long period of time, for example, in office areas of an enterprise, plan a long-term lease to prevent services from being affected by frequent lease or address renewals.

Planning DNS Parameters

If a DHCP client needs to communicate with other network devices through a domain name and obtain DNS parameters using DHCP, plan the IP address of the DNS server and domain name of the client.

Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 88708

Downloads: 57

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next