No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing IPv6 Statistics

Clearing IPv6 Statistics

Context

IPv6 statistics cannot be restored after being cleared. Therefore, exercise caution before clearing IPv6 statistics.

Procedure

  • Run the reset ipv6 statistics command in the user view to clear IPv6 traffic statistics.
  • Run the reset tcp ipv6 statistics command in the user view to clear TCP6 statistics.
  • Run the reset udp ipv6 statistics command in the user view to clear UDP6 statistics.
  • Run the reset ipv6 pathmtu [ vpn-instance vpn-instance-name ] { all | dynamic | static } command in the user view to clear PMTU entries.
  • Run the reset ipv6 neighbors { all | dynamic | static | vid vlan-id [ interface-type interface-number] | interface-type interface-number [ dynamic | static ] } command in the user view to clear IPv6 neighbor entries.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 82375

Downloads: 54

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next