No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing ARP Entries

Clearing ARP Entries

Context

ARP entries cannot be restored after being cleared. When you delete static ARP entries, the ( arp static ) command is also deleted. Exercise caution when you delete the ARP entries.

Procedure

  • Run the reset arp { all | dynamic | interface interface-type interface-number | packet statistics | static } command to clear ARP entries in the ARP mapping table.
  • Run the reset arp packet statistics command in user view to clear ARP packet statistics.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 89107

Downloads: 57

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next