SupportDocumentationRoutersAccess RoutersAR1000&2000&3000Configuration & CommissioningConfiguration Guide

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010 CLI-based Configuration Guide - IP Unicast Routing

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.

Configuring RIPng Preference

Configuring RIPng Preference

Context

When different routing protocols discover the routes to the same destination, set the RIPng preference to select the required route.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ripng [ process-id ] [ vpn-instance vpn-instance-name ]

    The RIPng view is displayed.

  3. Run preference { preference | route-policy route-policy-name } *

    The RIPng preference is set.

    By default, the RIPng preference is 100.