No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring LDP Extensions for Inter-Area LSPs
Configuring LDP Extensions for Inter-Area LSPs
Pre-configuration Tasks
Before configuring LDP extensions for inter-area LSPs, complete the following tasks:
Configuring a policy for summarizing routes according to Huawei AR Series IOT Gateway Configuration Guide - IP Routing
LDP extensions for inter-area LSPs enable LDP to search for routes according to the longest match principle and use summarized routes to establish LDP LSPs spanning multiple IGP areas.
Context
To configure LDP extensions for inter-area LSPs, configure the ingress or transit node.
Procedure
Run system-view
The system view is displayed.
Run mpls ldp
The MPLS LDP view is displayed.
Run longest-match
LDP is configured to search for routes based on the longest match rule to establish LSPs.
By default, LDP searches for routes to establish LSPs based on the exact matching rule.
Verifying the Configuration
Run the display mpls lsp command to check the setup of inter-area LSPs after LDP is configured to search for routes based on the longest match rule to establish LSPs.