No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring NAC Operation

Monitoring NAC Operation

Context

In routine maintenance, you can run the following commands in any view to check whether NAC is functioning properly.

Procedure

  • Run the display access-user command to view information about NAC access users.
  • Run the display dot1x command to view information about 802.1X authentication.
  • Run the display mac-authen command to view information about MAC address authentication.
  • Run the display portal command to view information about Portal authentication.
  • Run the display portal local-server connect command to view the connection status of users to be authenticated on a built-in Portal server.
  • Run the display server-detect state command to view the status of a Portal server.
  • Run the display mac-address authen command to view MAC address entries of the authen type in the system.
  • Run the display mac-address pre-authen command to view MAC address entries of the Pre-authen type in the system.
  • Run the display user-group [ group-name ] command to view the configuration of a user group.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034236

Views: 95378

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next