No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for Traffic Suppression and Storm Control

Default Settings for Traffic Suppression and Storm Control

Table 9-1 lists the default settings for traffic suppression.

Table 9-1  Default settings for traffic suppression

Parameter

Default Setting

Traffic suppression on an interface

Disabled

Traffic suppression for Internet Control Message Protocol (ICMP) packets

Disabled

Traffic suppression threshold for ICMP Packets

100 pps

Table 9-2 lists the default settings for storm control.
Table 9-2  Default settings for storm control

Parameter

Default Setting

Storm control

Disabled

Log record and alarm report

Disabled

Detection interval

5 seconds

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1100034236

Views: 113529

Downloads: 67

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next