No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a VPN Instance to Identify a Virtual Firewall

Configuring a VPN Instance to Identify a Virtual Firewall

Context

You can configure VPN instances to identify virtual firewalls. A VPN instance corresponds to a virtual firewall. Before configuring a virtual firewall, create a VPN instance and bind interfaces to the VPN instance. The interfaces bound to a VPN instance belong to the same firewall and can be configured with independent security policies.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ip vpn-instance vpn-instance-name

    A VPN instance is created, and the VPN instance view is displayed.

  3. (Optional) Run description description-information

    The description of the VPN instance is configured.

  4. Run route-distinguisher route-distinguisher

    The RD of the VPN instance is configured.

    After a VPN instance is created, you must specify the RD for the VPN instance. Otherwise, you cannot perform subsequent operations.

  5. Run interface interface-type interface-number

    The interface view is displayed.

  6. Run ip binding vpn-instance vpn-instance-name

    The interface is bound to the VPN instance.

    Bind the interface to the VPN instance before configuring an IP address for the interface. If the interface IP address is configured before the interface is bound to the VPN instance, the interface IP address is deleted. You need to reconfigure the IP address for the interface.

  7. Run ip address ip-address { mask | mask-length }

    An IP address is configured for the interface.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034236

Views: 95254

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next