No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Firewall in an Interzone

Enabling Firewall in an Interzone

Context

The configured firewall functions take effect only after you enable firewall in an interzone.

To make the firewall function take effect in an interzone that contains the Local zone, run the ip soft-forward enhance enable command in the system view to enable the enhanced IP forwarding function.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run firewall interzone zone-name1 zone-name2

    The interzone view is displayed.

    The zones zone-name1 and zone-name2 must have been created using the firewall zone command.

  3. Run firewall enable

    The firewall is enabled.

    By default, the firewall function is disabled in an interzone.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034236

Views: 96029

Downloads: 58

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next