No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying the Keychain

Applying the Keychain


The keychain only takes effect after it is applied to an application.

This section uses RIP as an example to describe how to apply the keychain to applications. Different applications may use different commands to apply the Keychain. Table 18-3 lists the commands used by different applications.
Table 18-3  Protocols that support the keychain authentication
Protocol Link


rip authentication-mode


peer keychain(MSDP)



ospf authentication-mode



isis authentication-mode


peer keychain(BGP)


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run rip authentication-modekeychain keychain-name

    The keychain used by RIP is configured.

Updated: 2019-05-20

Document ID: EDOC1100034236

Views: 95231

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next