Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Basic WLAN-Fat AP Service Configuration
You can configure the WLAN-Fat AP service to enable users to easily access a wireless network and move around within the coverage of the wireless network.
- Overview of WLANs
This section describes the definition and functions of WLANs. - Understanding Basic WLAN Services
This section describes principles for implementing basic WLAN services. - Application Scenarios for Basic WLAN-Fat AP Services
This section describes application scenarios of basic WLAN services. - Default Settings for Basic WLAN-Fat AP Services
This section provides the default settings for basic WLAN services. - Licensing Requirements and Limitations for Basic WLAN-Fat AP Services
- Configuring Basic WLAN-Fat AP Services
You can configure the WLAN-Fat AP service to enable users to easily access a wireless network and move around within the coverage of the wireless network. - Maintaining WLAN Fat APs
This section describes how to reset and initialize a Fat AP. - Configuration Examples for Basic WLAN Services
This section describes examples of configuring WLAN FAT APs, including networking requirements and configuration roadmap. - FAQ About Basic WLAN Services