No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (Earlier than V250) Alarm Handling 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-2100FFFF PIC Card Clock Lost (PIC Card, Major Alarm)

ALM-2100FFFF PIC Card Clock Lost (PIC Card, Major Alarm)

Description

Alarm message:

Fault status.

This alarm is generated when the PIC card clock is lost.

This alarm is generated by the following sensor: PIC$ CLK Status ($ indicates the PIC card slot number.)

Attribute

Alarm ID

Alarm Severity

Auto Clear

2100FFFF

Major

Yes

Parameters

Name

Meaning

Time

Indicates the time when the alarm was generated.

Sensor

Indicates the sensor that generated the alarm.

Event

Provides detailed information about the alarm.

Severity

Indicates the severity of the alarm.

Event Code

Indicates the event code of an alarm.

Impact on the System

The PIC card cannot work.

Possible Causes

The PIC card is faulty.

Procedure

  1. Replace the PIC card. Then check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Contact Huawei technical support.
Translation
Download
Updated: 2019-11-19

Document ID: EDOC1100035007

Views: 28836

Downloads: 11

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next