No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (Earlier than V250) Alarm Handling 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0341FFFF/0341FF0D State Asserted (No SD Card)

ALM-0341FFFF/0341FF0D State Asserted (No SD Card)

Description

Alarm message:

State Asserted

This alarm is generated when the SD card controller cannot detect either of the SD cards.

This alarm is generated by the following sensor:

  • No SD Card

For details about the SD card slot information, see the user guide of the server you use.

Attribute

Alarm ID

Alarm Severity

Auto Clear

iBMC: 0341FFFF

MM: 0341FF0D

Major

Yes

Parameters

Name

Meaning

Time

Time when an alarm is generated.

Sensor

Name of the sensor that generates an alarm.

Event

Details about an alarm.

Severity

Severity of an alarm.

Event Code

Event code of an alarm.

Impact on the System

No SD card is available and the system storage performance is reduced.

Possible Causes

  • The SD cards are removed.
  • The SD cards are not installed properly.
  • The SD card controller is faulty.

Procedure

  1. Check whether the SD cards are present.

  2. Remove and reinstall the SD cards. Then check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 4.

  3. Install SD cards. Then check whether the alarm is cleared.

    • If yes, the procedure ends.
    • If no, go to Step 4.

  4. Replace the mainboard. Then check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 5.

  5. Contact Huawei technical support for help.
Translation
Download
Updated: 2019-11-19

Document ID: EDOC1100035007

Views: 28097

Downloads: 11

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next