No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (Earlier than V250) Alarm Handling 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0702FFFF CPU Initialization Failed (FRB1/BIST) (CPUN Status)

ALM-0702FFFF CPU Initialization Failed (FRB1/BIST) (CPUN Status)


Alarm message:

CPU initialization failed (FRB1/BIST)

This alarm is generated when an error occurs in the CPU self-check during startup.

This alarm is generated by the following sensor:

  • CPUN Status (N indicates a CPU number.)


Alarm ID

Alarm Severity

Auto Clear








Time when an alarm is generated.


Name of the sensor that generates an alarm.


Details about an alarm.


Severity of an alarm.

Event Code

Event code that corresponds to an alarm.

Impact on the System

When a CPU self-check error occurs, the system cannot be started properly, or services are not properly running on the system.

Possible Causes

The possible cause of this alarm is as follows:

  • An error occurs in the CPU self-check.
  • A CPU fails.


  1. Power off the server, remove and install the power cables, and power on the server. Check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Replace the CPU. Then check whether the alarm is cleared.

    For details, see the server user guide.

    • If yes, no further action is required.
    • If no, go to Step 3.

  3. Contact Huawei technical support for help.
Updated: 2019-11-19

Document ID: EDOC1100035007

Views: 28675

Downloads: 11

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next