No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (Earlier than V250) Alarm Handling 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-2100FFFF Fault Status (EEPROM Status/PCIE EEPROM)

ALM-2100FFFF Fault Status (EEPROM Status/PCIE EEPROM)

Description

Alarm message:

Fault status

This alarm is generated when the electrically erasable programable read-only memory (EEPROM) of the mainboard or PCIe card cannot be accessed.

This alarm is generated by the following sensor:

  • EEPROM Status
  • PCIE EEPROM

Attribute

Alarm ID

Alarm Severity

Auto Clear

2100FFFF

Major

Yes

Parameters

Name

Meaning

Time

Time when an alarm is generated.

Sensor

Name of the sensor that generates an alarm.

Event

Details about an alarm.

Severity

Severity of an alarm.

Event Code

Event code that corresponds to an alarm.

Impact on the System

When the EEPROM is faulty, the electronic label information of the mainboard or PCIe card is inaccessible.

Possible Causes

  • The EEPROM is faulty.
  • Serial resistors connected to the EEPROM are faulty.

Procedure

  1. Contact Huawei technical support for help.
Translation
Download
Updated: 2019-11-19

Document ID: EDOC1100035007

Views: 28961

Downloads: 11

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next