No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (Earlier than V250) Alarm Handling 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-2100FFFF Fault Status (SESA Status)

ALM-2100FFFF Fault Status (SESA Status)

Description

Alarm message:

Fault status

This alarm is generated when the hard disk expander controller is abnormal or the hard disk enclosure is not closed.

This alarm is generated by the following sensor:

  • SESA Status

Attribute

Alarm ID

Alarm Severity

Auto Clear

2100FFFF

Major

Yes

Parameters

Name

Meaning

Time

Time when an alarm is generated.

Sensor

Name of the sensor that generates an alarm.

Event

Details about an alarm.

Severity

Severity of an alarm.

Event Code

Event code that corresponds to an alarm.

Impact on the System

The hard disk expander cannot work properly if the controller fails.

Possible Causes

  • The hard disk expander controller is faulty or the hard disk enclosure is not closed.

Procedure

  1. Reboot the server. Check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Reinstall the hard disk expander. Check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 3.

  3. Replace the hard disk expander. Check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 4.

  4. Close the hard disk enclosure. Check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 5.

  5. Contact Huawei technical support for help.
Translation
Download
Updated: 2019-11-19

Document ID: EDOC1100035007

Views: 27856

Downloads: 11

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next