No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server Compute Node and Switch Module iMana 200 Alarm Handling 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0705FFFF Configuration Error Critical Alarm (CPUN Status-)

ALM-0x0705FFFF Configuration Error Critical Alarm (CPUN Status-)

Description

Alarm message:

Configuration error

This alarm is generated when CPUs of different models are detected in a server, or one of the following errors occurs in a CPU.

  • Correctable hardware error
  • Non-fatal error
  • Fatal error

This alarm is generated by the following sensor: CPUN Status

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x0705FFFF

Critical

Yes

Parameters

Name

Meaning

N

Slot number of the CPU.

Impact on the System

The OS cannot start.

Possible Causes

  • The server is configured with different models of CPUs.
  • A CPU is faulty.
  • The mainboard is faulty.

Procedure

  1. Check whether the server is configured with different models of CPUs.

    • If yes, go to 3.
    • If no, go to 2.

  2. Use the same model of CPUs. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 3.

  3. Switch the CPU with a functioning CPU in the same chassis, and check whether the alarm is still generated for this CPU.

    • If yes, go to 4.
    • If no, go to 5.

  4. Replace the CPU. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 6.

  5. Replace the mainboard. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 6.

  6. On the HMM WebUI, choose System Management > Information Collection, and collect logs.
  7. Contact Huawei technical support.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1100035007

Views: 15012

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next