No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


E9000 Server Compute Node and Switch Module iMana 200 Alarm Handling 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0F01FFFF System Start Interrupt Critical Alarm (SysFWProgress)

ALM-0x0F01FFFF System Start Interrupt Critical Alarm (SysFWProgress)


Alarm message:

System firmware hang

This alarm is generated if the CPU does not match the BIOS version, or if the CPU matches the BIOS version but the CPU microcode fails to be loaded.

This alarm is generated by the following sensor: SysFWProgress


Alarm ID

Alarm Severity

Auto Clear




Impact on the System

The system cannot be started, or the CPU cannot operate normally.

Possible Causes

  • The CPU does not match with the BIOS version.
  • The CPU microcode fails to be loaded.


  1. Log into the iMana 200 CLI of server.
  2. Run the ipmcset -t maintenance -d upgradebios -v filepath to upgrade the BIOS to the latest version. Then check whether the alarm is cleared.

    For details about the command, see E9000 Server iBMC User Guide.

    • If yes, no further action is required.
    • If no, go to 3.

  3. Contact Huawei technical support for help.
Updated: 2018-08-16

Document ID: EDOC1100035007

Views: 15528

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next