No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FATAP and Cloud AP V200R009C00 Web-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Configuring Airtime Fair Scheduling

Example for Configuring Airtime Fair Scheduling

Networking Requirements

As shown in Figure 2-15, an enterprise deploys an AP to provide a WLAN with the SSID wlan-net so that users can access the network anywhere at any time.

The enterprise network administrator expects that users can be assigned equal bandwidth occupation time so that the overall user experience can be improved.

Figure 2-15  Networking diagram for configuring airtime fair scheduling

Data Preparation

Item Data

Service VLAN for STAs

VLAN 101

DHCP server

The AP functions as a DHCP server to assign IP addresses to STAs.

IP address pool for STAs

10.23.101.2-10.23.101.254/24

SSID profile

  • Name: wlan-net

  • SSID name: wlan-net

Security profile

  • Name: wlan-net

  • Security policy: WPA-WPA2+PSK+AES

  • Password: a1234567

VAP profile

  • Name: wlan-net

  • Service VLAN: VLAN 101

  • Referenced profile: SSID profile wlan-net and security profile wlan-net

RRM profile

  • Name: default

  • Airtime fair scheduling: enabled

2G radio profile

  • Name: default

  • Referenced profile: RRM profile default

Configuration Roadmap

The configuration roadmap is as follows:
  1. Use the WLAN configuration wizard to configure WLAN services.
  2. Configure airtime fair scheduling to enable all users on a radio to occupy the network bandwidth for equal time, improving the overall user experience.
  3. Connect STAs to the WLAN to verify the configuration.

Procedure

  1. Configure basic WLAN services.
    1. Choose Wizard > Config Wizard. The Configure Wi-Fi Signals page is displayed.
    2. Configure Wi-Fi signals.

      # Click Create. The Basic Information page is displayed.

      # Configure basic information about an SSID.

      # Click Next. The IP and Rate page is displayed.

      # Set IP address parameters.
      NOTE:

      Configure the DNS server address as required.



      # Click Finish.

    3. Configure Internet connection parameters.

      # Click Next. The Configure Internet Connection page is displayed.

      # Add an interface to VLAN 101 in tagged mode.
      NOTE:

      If you log in to the web platform using a PC whose Ethernet interface is being modified, do not delete the existing VLAN configuration on the interface to ensure that the PC can communicate with Fat APs. As shown in the following figure, GigabitEthernet0/0/0 is added to VLAN 1 by default and STAs communicate with the AP through this interface. You can use the default IP address of the AP to log in to the web platform. If you need to use the default IP address to log in to the web platform, do not delete VLAN 1.



      # Click Finish.

  2. Configure airtime fair scheduling.
    1. Configure a radio profile.

      NOTE:

      The following example configures a 2G radio profile. The configuration of the 5G radio profile is similar.

      # Choose Configuration > WLAN Service > WLAN Config.

      # Choose Radio0 > Radio Management > Radio Profile in WLAN Config. The Radio Profile page is displayed. Retain the default settings of the radio profile parameters.

      # Click next to Radio Profile. The profiles referenced by the radio profile are displayed.

    2. Configure the RRM profile and enable airtime fair scheduling in the RRM profile.

      # Click RRM Profile in Radio Management. The RRM profile configuration page is displayed.

      # Enable airtime fair scheduling.

      # Click Apply. In the dialog box that is displayed, click OK.

  3. Verify the configuration.
    1. The WLAN with the SSID wlan-net is available.
    2. The STA can associate with the WLAN and obtain an IP address 10.23.101.x/24 and its gateway address is 10.23.101.1.



    3. Choose Monitoring > Terminal Manage > STA Management. In User, you can see that STAs go online properly and obtain IP addresses.
    4. Run the display rrm-profile name default command on the AP to check the configuration of the RRM profile. The command output shows that airtime fair scheduling has been enabled. Therefore, users on the network can fairly use the channel resources.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1100035626

Views: 11086

Downloads: 429

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next