No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FATAP and Cloud AP V200R009C00 Web-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Web Platform

Logging In to the Web Platform

Context

You can log in to the web platform in wired mode or wireless mode for a common Fat AP. In wireless connection mode, STAs search for the WLAN HUAWEI-XXXX within the signal coverage of the AP. STAs can access the WLAN without entering the password.

Before logging in to the web platform in wired connection mode, perform the following tasks:

  • The IP address of the device's access port has been configured.
  • The device and your PC are properly connected.
  • The device is running properly, and the HTTP and HTTPS services are correctly configured.
  • The web browser software has been installed on your PC.
Before logging in to the web platform in wireless connection mode, perform the following tasks:
  • The device and your PC are properly connected.
  • The device is running properly, and the HTTP and HTTPS services are correctly configured.
  • The web browser software has been installed on your PC.
NOTE:
  • Before the device is delivered, the STelnet service has been configured on the device. The STelnet port number is 22, and the default user name and password are respectively admin and admin@huawei.com.
  • Before the device is delivered, the HTTP and HTTPS services have been configured on the device. The default port number is 80 for HTTP and 443 for HTTPS. The default user name and password are respectively admin and admin@huawei.com.

Figure 1-2and Figure 1-3 show the running environment of the web platform that can be managed and configured on your PC.

Figure 1-2  Running environment of the web platform in wired connection mode
Figure 1-3  Running environment of the web platform in wireless connection mode

Procedure

  1. Open a browser such as Internet Explorer 10.0, enter http://IP address or https://IP address in the address box, for example, http://169.254.1.1 or https://169.254.1.1, and press Enter. (169.254.1.1 is used as an example here. Enter the actual IP address of the access interface.) The web platform login page is displayed.

    NOTE:

    When a user logs in to a device through HTTP, the HTTPS login page is displayed. If the HTTPS service is unavailable, for example, the HTTPS service is not enabled, or the HTTPS service is enabled but not bound to an SSL policy, the incorrect page is displayed.

    The following uses login through STelnet in wired connection mode as an example. The default gateway address for logging in to the web platform through STelnet in wireless connection mode is 192.168.1.1/24, and this login mode is not mentioned here.

  2. Enter the login information.

    NOTE:
    For a cloud AP or cloud central AP, the locally changed password is valid only before the device registers with the Agile Controller-Campus. After the device registers, the Agile Controller-Campus uniformly delivers an administrator password. The delivered password will overwrite the locally configured one and is permanently valid.
    1. Select a language.

      The system supports English and Chinese. By default, the system uses the same language as the browser.

    2. Enter a user name and password.

      The default user name and password are admin and admin@huawei.com.

    3. Click Login.

      To ensure security of the web platform, you are prompted to change the password upon the first login, and log in to the web platform again.

    NOTE:

    If the login fails, the following possible causes are displayed at the same time:

    • The user name or password is incorrect.: indicates that the entered user name or password is incorrect. Click OK to check the user name and password. If they are incorrect, enter them again.
    • The user does not have the right to log in or the login right expires.: indicates that the current online user has no permission to log in to the web platform. Contact network administrators.
    • The number of login users has reached the maximum value.: indicates that the number of online web users reaches the upper limit. By default, the maximum number of online web users is 1.
    • The number of times the password is incorrectly entered has reached the limit, and the user is locked.: indicates that the current login account is locked and will be automatically unlocked after 5 minutes.

  3. Click Logout in the upper right corner to Log out of the web platform. The login page is displayed.
  4. If you do not perform any operation within a specified duration (10 minutes by default), you are logged out. To return to the login page, click OK.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1100035626

Views: 11410

Downloads: 432

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next