No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionCube DB 3.1 Database Best Practice 03 (Oracle RAC 11g R2)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an ACFS

Configuring an ACFS


  1. Switch to user grid and run the asmca command to go to the ASM ConfigurationAssistant GUI. Create an ACFS.

    1. On the Volumes tab, click the Create button.
    2. Set the volume name, disk group name, and ACFS volume size, and click OK.
      Figure 7-1 ASM Configuration Assistant

  2. Click the ASM Cluster File Systems tab, select the ACFS volume from Volume, the mount point from Mount Point, and Yes in Register Mount Point, and click OK.


    It takes time to mount the server. Do not close the window during the process.

    Figure 7-2 Create ASM Cluster File System

  3. Obtain and decompress to a local directory. If FusionCube Builder is used to install software, the script is deployed by default.
  4. Open WinSCP, create a connection with the system, access the local directory where the decompressed file is located, right-click the script file, choose Upload from the shortcut menu, change the transfer mode to the binary mode, and click OK.
  5. After confirming that the script is successfully uploaded, run the following command as user root:

    [root@dbn02 ~]# sh  
    INFO:drop cache scripts install success, /opt/dsware/ will run every 60 minutes; 
    [root@dbn02 ~]# crontab –l                    //Check whether the script is configured. 
    0 0 * * * sh /opt/omm/oma/tools/func/ & 
    * * * * * sh /opt/dsware/agent/script/ >/dev/null 2>&1 & 
    * * * * * sh /opt/omm/oma/tools/oma_monitor >/dev/null 2>&1 & 
    */5 * * * * sh /opt/fc2/bin/scripts/ssdp_monitor > /dev/null 2>&1 
    0 * * * * sh /opt/dsware/ > /dev/null 2>&1  
    [root@dbn02 ~]# sh  /opt/dsware/      //Manually test the script for memory refreshing.

Updated: 2018-12-26

Document ID: EDOC1100035759

Views: 32531

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next