No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionCube DB 3.1 Database Best Practice 03 (Oracle RAC 11g R2)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the NFS Directory

Configuring the NFS Directory

At the third site, use the NFS technology to mount a new disk and load the disk into the quorum failgroup group. In this way, three failgroups are created. Then, mount the NFS directory to all RAC nodes of the database:

# mkdir -p /u01/ocrdata 
# vi /etc/fstab 
nfs_nas_server:/vol/DATA/oradata  /u01/oradata     nfs  rw,bg,hard,nointr,tcp,nfsvers=3,timeo=600,rsize=32768,wsize=32768,actimeo=0 

Run the following command on any RAC node to generate the OCR disk file:

# dd if=/dev/zero of=/u01/ocrdata/disk1 bs=1024k count=10000 oflag=direct 
# chown -R grid:asmadmin  /u01/ocrdata/
# chmod 660 /u01/ocrdata/*
Updated: 2018-12-26

Document ID: EDOC1100035759

Views: 32530

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next