No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Directory (VFOneNet)

Directory (VFOneNet)

This section describes how to configure a directory.

Context

The directory supports two search methods, by name and by phone number.

  • Search by name

    You can search for a contact by first name, last name, initials or abbreviations, or full name.

    For example, if a contact's name is Mary Wong, you can enter Mary, Wong, MW, or Mary Wong for a search.

  • Search by phone number

    You can search for a contact by fixed-line, mobile, or other numbers.

NOTE:

In the directory of HUAWEI IP Phone 7920/7960, a contact's profile picture displayed on the phone screen is the profile picture that the contact has customized on the soft client. However, if a contact does not customize his/her profile file but uses a profile picture provided by the soft client system, HUAWEI IP Phone 7920/7960 displays the phone's default profile picture for that contact on the phone screen, but not the one provided by the soft client system.

Configuration Methods

You can configure a directory using three different methods, as listed in Table1 Configuration methods.

Table 5-22 Configuration methods

Method

Details

DHCP Option 246

Set related parameters in the configuration file and deliver the new configuration file to the IP phone.

Web

On the phone web page, choose Advanced > Server and set related parameters on the page that is displayed.

LCD

On the phone LCD screen, choose Apps > Advanced > Server > Directory > Directory Server and set related parameters on the screen that is displayed.

Parameter Settings

lists the directory parameters that you must set.

Table 5-23 Configuration methods

Parameter

Description

How to Set

How to Modify the Configuration File

Directory Server

Specifies the directory type.

  • When the XML directory is used, select Directory(VFOneNet).
  • When the LDAP directory is used, select LDAP.

Set this parameter to Directory(VFOneNet).

Parameter: Type

Location: Device > ComCfg > EADDR > Type

Value: 1 or 3

  • 1: LDAP directory
  • 3: Directory(VFOneNet)

Default: 3

Example: Type="3"

Directory Server

Indicates the directory server.

Set Directory Server.

Format of the directory server address: https://directory server IP address:port/example/CdiResults.aspx?

NOTE:

The directory supports only HTTPS.

Parameters: PrimaryEAddrServerAddress

Location: Device > ComCfg > Phone > Server

Setting: Set PrimaryEAddrServerAddress to the address of the active directory server

Example: PrimaryEAddrServerAddress="https://10.174.16.221:44321/Huawei/CdiResults.aspx?"

Search Timeout Duration

Indicates the duration within which the server is required to return data after you pressed the Search softkey for contact search.

Enter a value based on your network environment.

Value range: 10–30s

Default value: 20

Parameter: WaitTime

Location: Device > ComCfg > EADDR > WaitTime

Example: WaitTime="20"

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 26978

Downloads: 60

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next