No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing a UPF File

Preparing a UPF File

This section describes the method and example of how to prepare a UPF file.

Prerequisites

You have obtained:

  • Hardware version number of the IP phone to upgrade
  • Address of the HTTP/HTTPS server where the files for the IP phone to upgrade are stored
  • Target version number
  • UPF template (which is delivered with the version release)

For information about the preceding three items, see Required Data.

Context

  • A UPF file defines the scope of the IP phones to upgrade and the upgrade policies.
  • Before an upgrade, an IP phone obtains the UPF file from the preconfigured upgrade file server. For HUAWEI IP Phone 7920/7960, the UPF file name has been configured before factory delivery and is in format of UPF-Product model.xml. Ensure that the name of the UPF file on the upgrade file server is the same as the factory default, for example, UPF-HUAWEI_IP_Phone_7920.xml.
  • When you need to upgrade both HUAWEI IP Phone 7920 and 7960, you can use a single UPF file to define the upgrade file directories for the two models.
NOTE:

The UPF file must be encoded using UTF-8. You are advised to use Notepad++ to edit the UDF file.

Procedure

  1. Obtain the UPF template, as shown in Figure 8-1.
  2. Modify the parameters (see Table 8-1 for detailed parameter descriptions) in the UPF template depending on your needs.

    Figure 8-1 UPF template
    Table 8-1 Parameter description

    No.

    Parameter

    Mandatory or Optional

    Description

    UPFDeviceInfo

    Mandatory

    • ManufacturerOUI: indicates the manufacturer ID. The value can only be huawei.
    • ModelName: indicates the product model. The value can only be MediaPhone.

    UpgradePolicy

    Mandatory

    NumberOfInstances: indicates the number of instances in a UPF file, which is the number of IP phone models to upgrade using the UPF file. By default, the value is 1.

    If you plan to use a single UPF file to upgrade both HUAWEI IP Phone 7920 and HUAWEI IP Phone 7960, set NumberOfInstances to 2. Then, copy the information marked with , , and in the figure, and tailor this copy for HUAWEI IP Phone 7960.

    UpgradePolicyInstance

    Optional

    UpgradePolicyInstance: specifies the upgrade policy information. An IP phone can be upgraded only when its information matches that specified in the following parameters:

    • HardwareVersion: indicates the hardware version of the IP phone to upgrade.
    • SoftwareVersion: indicates the software version of the IP phone to upgrade.
    • IPAddress: indicates the IP address of the IP phone to upgrade.
    • SerialNumber: indicates the serial number of the IP phone to upgrade.
    NOTE:

    If the parameter values are separated using vertical bars (|), the relationship between the values is logical OR. If the values are separated using colons (:), the value range is specified (available only for IPAddress and SerialNumber).

    For example, HardwareVersion="*" indicates that IP phones with any hardware versions can be upgraded, HardwareVersion="EP21MPUA VER.B" indicates that IP phones with their hardware versions being EP21MPUA VER.B can be upgraded, and HardwareVersion="EP21MPUA VER.B|EP21MPUA VER.A" indicates that IP phones with their hardware versions being EP21MPUA VER.B or EP21MPUA VER.A can be upgraded.

    UpgradeFileInstance

    Mandatory

    NumberOfInstances: indicates the number of upgrade files.

    InstanceID: indicates the upgrade file ID.

    1 Firmware Upgrade Image

    Optional

    Indicates the version file.

    • FileType: indicates the file type. This parameter has a fixed value of 1 Firmware Upgrade Image.
    • FileVersion: indicates the file version number of the target software.
    • FileURL: indicates the directory where the file is stored, for example, https://192.168.1.244/HuaweiIPPhone7920V600R006C00SPC100.bin.
    • UTC: indicates the current system time.
    • Username and Password: indicate the user name and password for authentication on the file server. Change the Username and Password values based on the site requirements.

    2 Config File

    Optional

    Indicates the configuration file.

    • FileType: indicates the file type. This parameter has a fixed value of 2 Config File.
    • FileVersion: indicates the file version. Set this parameter to invalid.
    • FileURL: indicates the directory where the file is stored, for example, https://192.168.1.244/Config-HUAWEI _IP_Phone_7920.xml.
    • UTC: indicates the current system time.
    • Username and Password: indicate the user name and password for authentication on the file server. Change the Username and Password values based on the site requirements.

    3 Signal Voice File

    Optional

    Indicates the signal tone file.

    • FileType: indicates the file type. This parameter has a fixed value of 3 Signal Voice File.
    • FileVersion: indicates the file version. Set this parameter to invalid.
    • FileURL: indicates the directory where the file is stored, for example, https://192.168.1.244/voice.tar.
    • UTC: indicates the current system time.
    • Username and Password: indicate the user name and password for authentication on the file server. Change the Username and Password values based on the site requirements.

    4 Language Package

    Optional

    Indicates the language package file.

    • FileType: indicates the file type. This parameter has a fixed value of 4 Language Package.
    • FileVersion: indicates the file version. Set this parameter to invalid.
    • FileURL: indicates the directory where the file is stored, for example, https://192.168.1.244/language7920_gr.tar.
    • UTC: indicates the current system time.
    • Username and Password: indicate the user name and password for authentication on the file server. Change the Username and Password values based on the site requirements.

    5 CA letter File

    Optional

    Indicates the certificate file.

    • FileType: indicates the file type. This parameter has a fixed value of 5 CA letter File.
    • FileVersion: indicates the file version. Set this parameter to invalid.
    • FileURL: indicates the directory where the file is stored, for example, https://192.168.1.244/cacert.pem.

      If multiple certificates exist, compress them into a .tar file, for example, https://192.168.1.244/cacert.tar.

    • UTC: indicates the current system time.
    • Username and Password: indicate the user name and password for authentication on the file server. Change the Username and Password values based on the site requirements.

    7 Wallpaper

    Optional

    Indicates the wallpaper file.

    • FileType: indicates the file type. This parameter has a fixed value of 7 Wallpaper.
    • FileVersion: indicates the file version. Set this parameter to invalid.
    • FileURL: indicates the directory where the file is stored, for example, https://192.168.1.244/wallpaper.tar.
    • UTC: indicates the current system time.
    • Username and Password: indicate the user name and password for authentication on the file server. Change the Username and Password values based on the site requirements.
    NOTE:

    Wallpaper files of the .jpg, .bmp and .png formats are supported. The resolution must be lower than 800*600. The total size of wallpaper files delivered each time must be less than 2 MB. A maximum of eight customized wallpapers are supported. The total size of wallpaper and ringtone files must be less than 10 MB.

    8 ring tone file

    Optional

    Indicates the ringtone file.

    • FileType: indicates the file type. This parameter has a fixed value of 8 ring tone file.
    • FileVersion: indicates the file version. Set this parameter to invalid.
    • FileURL: indicates the directory where the file is stored, for example, https://192.168.1.244/ringtone.tar.
    • UTC: indicates the current system time.
    • Username and Password: indicate the user name and password for authentication on the file server. Change the Username and Password values based on the site requirements.
    NOTE:

    Ringtone files of 8 KHz sampling rate, 16-bit sampling precision, and the .wav format are supported. The total size of wallpaper and ringtone files must be less than 10 MB.

    -

    9 MFG file

    Optional

    Customized factory configuration file.

    • FileType="9 MFG file"
    • FileVersion: indicates the file version. Set this parameter to invalid.
    • FileURL: indicates the directory where the customized factory configuration file is located, for example, https://192.168.1.244/defaultMFG_cfm.xml
    • UTC: indicates the current system time.
    • Username and Password: indicate the user name and password for authentication on the file server. Change the Username and Password values based on the site requirements.

    UpgradeResult

    Optional

    Indicates the address of the server to which the IP phone reports error information.

    In the current version, this parameter is not available.

    UpgradeControl

    Mandatory

    • UserDecision="YES": indicates that a dialog box is displayed asking users to decide whether to upgrade the IP phone when a new version is detected.
    • UserDecision="NO": indicates that the IP phone is directly upgraded when a new version is detected.
    NOTE:
    • For the version file (1 Firmware Upgrade Image), FileVersion is mandatory and UTC is optional. For the resources files (files numbered 2 to 6), FileVersion is invalid and its value can be empty, while UTC is mandatory and its value is in the standard time format, for example, 1970-01-01T08:00:04. The value of UTC for a file determines whether the file is upgraded.
    • IP phones support HTTP and HTTPS. HTTP is an insecure protocol. You are advised to use HTTPS.
    • When compressing multiple files into a .tar package, directly compress them without creating a directory and copying them to the directory first. On the Windows operating system, you can use the 7-Zip to compress files.

    • The UPF file is designed to prohibit cyclic upgrade. For example, the settings of an upgrade from version A to version B and from version B to version A are not supported.
    • Changes in configuration tree (c_tree.xml) may lead to upgrading failure of HuaweiIPPhone79XX.bin. It's recommended that putting HuaweiIPPhone79XX.bin file before c_tree.xml when upgrading, or you can upgrade them separately.
    • When the UPF File is used for deploying IP phones, only common configurations can be imported. Personal configurations cannot be imported.

Example

This configuration example demonstrates how to set the UPF file for upgrading the versions and configuration files of HUAWEI IP Phone 7920(hardware versions: EP21MPUA VER.B and EP21MPUA VER.A) and HUAWEI IP Phone 7960 (hardware versions: EP11MPUA VER.B and EP11MPUA VER.A) to V600R006C00SPC100:

<?xml version="1.0"?> 
 <InternetGatewayDeviceConfig xmlns="urn:dslforum-org:cpe-device-config-1-0"> 
     <UpgradePolicyFile> 
         <UPFDeviceInfo ManufacturerOUI="huawei" ModelName="MediaPhone"/> 
         <UpgradePolicy NumberOfInstances="2"> 
             <UpgradePolicyInstance InstanceID="1" HardwareVersion="EP21MPUA VER.B|EP21MPUA
 VER.A" SoftwareVersion="*" IPAddress="*" SerialNumber="*"> 
                 <UpgradeFile NumberOfInstances="2">                  
                     <UpgradeFileInstance InstanceID="1" FileType="1 Firmware Upgrade Image"
 FileVersion="V600R006C00SPC100"
 FileURL="https://192.168.1.227/HuaweiIPPhone7920V600R006C00SPC100.bin" UTC="2013-07-
10T09:13:11" Username="admin" Password="Admin*123"/> 
                     <UpgradeFileInstance InstanceID="2" FileType="2 Config File"
 FileVersion="invalid" FileURL="https://192.168.1.227/Config-HUAWEI_IP_Phone_7920.xml"
 UTC="2013-07-10T09:14:11" Username="admin" Password="Admin*123"/> 
                     </UpgradeFile> 
                 <UpgradeResult ResultURL="https://192.168.1.227" Username="" Password=""/> 
                 <UpgradeControl UserDecision="YES" Source=""/> 
             </UpgradePolicyInstance> 
             <UpgradePolicyInstance InstanceID="2" HardwareVersion="EP11MPUA VER.B|EP11MPUA
 VER.A" SoftwareVersion="*" IPAddress="*" SerialNumber="*"> 
                 <UpgradeFile NumberOfInstances="2">                  
                     <UpgradeFileInstance InstanceID="1" FileType="1 Firmware Upgrade Image"
 FileVersion="V600R006C00SPC100"
 FileURL="https://192.168.1.227/HuaweiIPPhone7960V600R006C00SPC100.bin" UTC="2013-07-
10T09:13:11" Username="admin" Password="Admin*123"/> 
                     <UpgradeFileInstance InstanceID="2" FileType="2 Config File"
 FileVersion="invalid" FileURL="https://192.168.1.227/Config-HUAWEI_IP_Phone_7960.xml"
 UTC="2013-07-10T09:14:11" Username="admin" Password="Admin*123"/> 
                     </UpgradeFile> 
                 <UpgradeResult ResultURL="https://192.168.1.227" Username="" Password=""/> 
                 <UpgradeControl UserDecision="YES" Source=""/> 
             </UpgradePolicyInstance> 
         </UpgradePolicy> 
     </UpgradePolicyFile> 
 </InternetGatewayDeviceConfig>
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21281

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next