No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Connection Between an IP Phone and eSight

Configuring the Connection Between an IP Phone and eSight

Before connecting an IP phone to eSight, set TR069 parameters on the IP phone.

  • Set TR069 parameters. For details, see Setting Parameters for Connecting to eSight.
    • If a domain name service (DNS) server is available onsite, configure the mapping between the eSight domain name and IP address on the DNS server to complete TR069 parameter settings.
    • If a Dynamic Host Configuration Protocol (DHCP) server is available onsite, set the DHCP Option246 field to batch deliver TR069 parameters.
    • If neither a DNS server nor DHCP server is available onsite, manually set TR069 parameters on the web page or liquid crystal display (LCD) screen of an IP phone.
  • Obtain TR069 parameters. For details, see Configuring the Access Scan Function of eSight.

    If neither a DNS server nor DHCP server is available onsite and a great number of IP phones are deployed, use the access scan function to batch set TR069 parameters.

    NOTE:
    • In an office with the NAT environment, you need to set STUN server parameters first. For details, see Setting STUN Server Parameters.
    • If the redirection server is deployed onsite, you do not need to connect IP phones to the ACS server. IP phones automatically obtain the ACS server URL from the redirection server.

Setting Parameters for Connecting to eSight

This section describes how to set parameters for connecting HUAWEI IP Phone 7920/7960 to eSight for unified management.

Context
  • If a DHCP server has been deployed, HUAWEI IP Phone 7920/7960 obtains the Application Control Server (ACS) IP address (carried in the Option 246 field) and its own IP address from the DHCP server. HUAWEI IP Phone 7920/7960 then resolves the ACS server address to obtain the eSight IP address. According to the eSight server IP address, HUAWEI IP Phone 7920/7960 automatically sends a request for connecting to eSight. Once HUAWEI IP Phone 7920/7960 is connected to eSight, its information is displayed on the eSight management portal.
  • If a DNS server has been deployed, HUAWEI IP Phone 7920/7960 obtains the DNS server address and its own IP address from the DHCP server, and sends a request to the DNS server for resolving the enterprise domain name (for example, ucems.company.com) into the eSight IP address. According to the eSight IP address, HUAWEI IP Phone 7920/7960 automatically sends a request for connecting to eSight. Once HUAWEI IP Phone 7920/7960 is connected to eSight, its information is displayed on the eSight management portal.
  • If neither a DHCP server nor the DNS server is available, you need to specify a static IP address for HUAWEI IP Phone 7920/7960 on its LCD screen first and manually set the ACS IP address to the eSight IP address for HUAWEI IP Phone 7920/7960.
Connecting to eSight Using DHCP

HUAWEI IP Phone 7920/7960 is able to resolve the value of acs.address carried in the DHCP Option 246 field to obtain the eSight IP address.

  • If the DHCP server installed on the Windows Server 2008 is used, set String value for the Option 246 field to acs.address=http://ACS server IP address:Port number/tr069/services/acs or acs.address=https://ACS server IP address:Port number/tr069/services/acs, for example, acs.address=http://192.168.1.37:8089/tr069/services/acs or acs.address=https://192.168.1.37:8444/tr069/services/acs. For details about the setting, see Setting Option 246 Parameters.
  • If a switch is used as the DHCP server, set the DHCP server's Option 246 field to acs.address=http://ACS server IP address:Port number/tr069/services/acs or acs.address=https://ACS server IP address:Port number/tr069/services/acs, for example, acs.address=http://192.168.1.37:8089/tr069/services/acs or acs.address=https://192.168.1.37:8444/tr069/services/acs.
NOTE:

If HTTPS client authentication has been enabled, the ACS address format is https://eSight domain name:8444/tr069/services/acs or http://eSight domain name:8089/tr069/services/acs, and the eSight domain name in the URL must be the same as the value of Common Name in the eSight server certificate.

Connecting to eSight Using DNS

If a DNS server has been deployed, add the default domain name ucems.company.com to the DNS server and map ucems.company.com to the eSight IP address. For details about how to add a DNS domain name, see Setting Up the AD and DNS Servers.

If you have added the domain name, right-click the domain name and choose Properties from the shortcut menu, as shown in Figure 4-24. In the window that is displayed, set the IP address of the domain name to the eSight IP address.

Figure 4-24 Modifying domain name settings on the DNS server
NOTE:
  • If you want to change the default domain name ucems.company.com to your enterprise domain name, for example, example.com, enter example.com (company is a variable, which is the name of your company) in the Option 15 field of the DHCP server. The IP phone then automatically changes the domain name from the factory default (ucems.company.com) to ucems.example.com and changes the ACS address from the factory default (https://ucems.company.com/tr069/services/acs) to https://ucems.example.com /tr069/services/acs.
  • In the VFOneNet network environment, the Option 15 field is not supported.
Connecting to eSight in Manual Mode

For HUAWEI IP Phone 7920/7960, the factory default of the ACS address is "https://ucems.company.com:8444/tr069/services/acs". In manual connection mode, replace ucems.company.com with the eSight IP address according to the data plan.

The administrator can set ACS server parameters on the LCD screen or phone web page.

  • On the phone login screen, choose Network > Server > ACS Server and modify the settings of ACS parameters.
  • On the phone web page, choose Advanced > TR069 and modify the settings of ACS parameters. For details, see TR069.

Configuring the Access Scan Function of eSight

Context

When a great number of IP phones connect to the eSight, the eSight uses the access scan function to send auto-configuration server (ACS) addresses and certificate paths to the IP phones. After IP phones automatically update their configurations based on the information received from the eSight, the IP phones automatically connect to corresponding IP phone group.

  • Devices that are scanned for may not be IP phones because the eSight cannot distinguish device types from the information sent by the scanned devices during scan access. This results in that the number of scanned devices is different from the number of connected IP phones.
  • If you restart the eSight when an access scan task is running, the task will not continue after the restart. You must manually stop the task and start the task again.
Prerequisites
  • An IP phone group has been created.
  • IP phones of the correct models and versions are available.
Procedure
  1. Log in to the eSight web management system as the administrator.
  2. Choose Resource > Collaboration Resource > Terminal Device Management from the main menu.
  3. In the navigation tree on the left, choose Terminal Management > Resource Management > Terminal Resource.
  4. Click Access Scan.
  5. (Optional) Configure CPE user name and password.

    1. Click .

      The Config page is displayed.

    2. Modify CPE User Name and CPE Password based on IP Phone device, click Confirm.

      The default values of CPE User Name and CPE Password are huawei and huawei123, respectively.

    3. Perform access scan for IP phones in the preset network segment using any of the following three methods:
      • (Recommended) Immediate scan
      • Scheduled scan: periodic scan, daily scan, and monthly scan
        • Periodic scan: periodically scans IP phones according to the preset period.
        • Daily scan: starts scanning at the preset time every day.
        • Weekly scan: starts scanning at certain time of a certain day every week.
      • Both immediate scan and scheduled scan: immediately scans IP phones first, and then periodically scans IP phones.

  6. Set scan parameters.

    1. Click Add in Scan Parameters.

      The Select Terminal Group page is displayed.

    2. Click Add.
    3. Select Select Group from the navigation tree on the left. In the Available resources area, select the IP phone group that is created, and click OK.

      The Select Terminal Group page is displayed.

    4. Click Next. The Set Scan Segments page is displayed.
    5. Click Confirm.

  7. Configure access scan.

    1. Select the network segment where IP phones that need to connect to eSight through access scan reside.
    2. Click Start.

Result

On the Terminal Device Management > Terminal Management > Terminal Resource page, you can check the IP phone access status.

Adding IP Phone Devices in Batches

The eSight allows you to import IP phone devices in batches. Enter device information in the Excel template provided by the eSight and import information in the Excel template to the eSight. Then the eSight will automatically add the devices specified in the Excel template to the corresponding IP Phone group.

Prerequisites

Protocol parameters have been set on IP Phone devices. For details.

Procedure
  1. Choose Resource > Collaboration Resource > Terminal Device Management from the main menu.
  2. In the navigation tree, choose Terminal Management > Resource Management > Terminal Resource.
  3. Click Import. In the Import area, download the template to your local computer.
  4. Enter the IP Phone information in the template and save the template. For details about how to fill in the template, see the Instructions sheet in the template.
  5. Click next to Upload file and select the Excel template.
  6. Click to upload the template.
Result

You can find that the IP phones specified in the Excel template are displayed in the management object list.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21286

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next