No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the VLAN

Configuring the VLAN

You can configure the VLAN manually or enable automatic VLAN configuration for HUAWEI IP Phone 7920/7960.

Automatic Configuration

The Link Layer Discovery Protocol (LLDP) allows switches to deliver VLAN information carried in LLDP data packets.

The switch in use must support LLDP in order to implement automatic VLAN configuration for HUAWEI IP Phone 7920/7960.

To enable LLDP for HUAWEI IP Phone 7920/7960 to automatically obtain VLAN information, perform the following steps:

  1. Power on HUAWEI IP Phone 7920/7960.

    The phone login screen is displayed.

  2. On the phone login screen, choose More > Network.

    The Network screen is displayed.

  3. Choose Network Access > LLDP-MED and press the Enable softkey.

Configuring the VLAN Using Option 132 and Option 133

An IP phone, through its LAN port, can obtain the VLAN ID using DHCP Option 132 and obtain the VLAN priority using DHCP Option 133. When only Option 132 is configured, the DHCP server delivers 6 as the value of the VLAN priority by default.

  • If a DHCP server installed on the Windows 2008 Server is used, enter the VLAN ID (for example, 192) for String value of Option 132 and enter the VLAN priority (for example, 6) for String value of Option 133 by referring to Setting Option 246 Parameters.
  • If the switch is used as the DHCP server, enter the VLAN ID (for example, 192) in the Option 132 field of the DHCP server and enter the VLAN priority (for example, 6) in the Option 133 field of the DHCP server.
NOTE:
  • You must enter hexadecimal values for String value of Option 132 and Option 133; otherwise, VLAN IDs fail to be delivered.
  • The character string in DHCP Option mode contains a maximum of 590 characters.

Manual Configuration

Obtain the VLAN ID and priority from the switch before attempting to manually configure VLAN information.

To manually configure VLAN information, perform the following steps:

  1. Power on HUAWEI IP Phone 7920/7960.

    The phone login screen is displayed.

  2. On the phone login screen, choose More > Network.

    The Network screen is displayed.

  3. Choose Network Access > VLAN and press the Enable softkey.
  4. Set VLAN ID according to the VLAN ID obtained.
  5. Set VLAN Priority according to the VLAN priority obtained and press the Done softkey.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21751

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next