No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Up the DHCP Server on Router AR-28

Setting Up the DHCP Server on Router AR-28


Log in to router AR-28 using a serial port and enable the DHCP server function on the router. The following describes the configuration scripts and provides some explanations that help you complete this task:

<Quidway>system-view                 //Enter the configuration mode. 
 [Quidway]dhcp enable                  //Enable the DHCP server function of the router. 
 [Quidway]dhcp server detect           //Verify the DHCP server function. 
 [Quidway]interface Ethernet 0/1       //Connect to network port 1 on board 0.     

Make sure that the network cable is correctly connected to network port 1 on board 0 on router AR-28. In the rear panel of the router, you can view the board slots and enable DHCP function on network port 1.

[Quidway-Ethernet0/1]ip address //Set the IP address of network port 0/1. The router also uses this IP address as the gateway address and allocates it to the DHCP client. 
 [Quidway-Ethernet0/1]dhcp select interface          //Select the DHCP server mode based on interfaces. You can select the DHCP server based on other modes. 
 [Quidway-Ethernet0/1]dhcp server dns-list //Set the DNS server IP address that will be delivered along with the gateway IP address to the DHCP client. The DNS server IP address is optional. 
 [Quidway-Ethernet0/1]dhcp server option **** //Set the DHCP options as required. 
 [Quidway-Ethernet0/1]dhcp server expired ****  //Set the DHCP lease period. You can set the lease period to unlimited or several days. The maximum lease period is 365 days. The default lease period is 24 hours. 
 [Quidway-Ethernet0/1]quit      //Return to the configuration mode. 
 [Quidway]quit     //Exit the configuration mode. 
 <Quidway>save //Save the settings.     

After the configuration, save the configured data. Otherwise, the data you configured will be lost after system restart.


In the preceding scripts, *** indicates the parameters followed. These parameters can be set based on your needs. For which parameters can be set, press Shift + ?.

Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 27507

Downloads: 62

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next