No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Ping Test

Ping Test

This section describes how to verify network connectivity using the ping command.

Verifying Network Connectivity Using the Ping Command on the Phone Web Page

  1. Access the phone web page as an administrator. For details, see Web Page Access.
  2. Choose Advanced > Ping Test.

    The Ping Test page is displayed, as shown in Figure 6-14.

    Figure 6-14 Ping Test

  3. In the IP Address text box, enter the IP address to test and click Start. Then, wait for the system to return the test result.

    For example, you have entered the IP address 192.168.1.55. If the number of received packets is the same as that of sent packets and no packet is lost, as shown in Figure 6-15, the IP phone successfully connects to the 192.168.1.55 network.

    Figure 6-15 Ping test result

Verifying Network Connectivity Using the Ping Command on the LCD Screen of the IP Phone

  1. Choose Advanced > Ping Test on the LCD screen as an administrator. For details, see section Advanced Screen Access.
  2. In the IP Address text box, enter the IP address to be tested and click Start. Then, wait for the system to return the test result.

    For example, you have entered the IP address 10.174.206.45. If the number of received packets is the same as that of sent packets, and no packet is lost, as shown in Figure 6-16, the IP phone successfully connects to the 10.174.206.45 network.

    Figure 6-16 LCD ping test result

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 22037

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next