No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Distinctive Ring

Distinctive Ring

This section describes how to configure the distinctive ring service.


The distinctive ring service rights have been assigned.

Configuration Methods

You can configure the distinctive ring service using four different methods, as listed in Table 5-1.

Table 5-1 Configuration methods




On the eSight management portal, choose Resource > Collaboration Resource > Terminal Device Management > Deployment Management > Configuration file. Select the corresponding configuration file, click , and expand the configuration items. On the System tab page, set related parameters in the Ringtone Parameter Settings area.

DHCP Option 246

Set related parameters in the configuration file and deliver the new configuration file to the IP phone.


Log in to the TMS and click the Subscriber/Device Operation tab. In the pane on the left of the window, click Data Model Tree. Deliver the configuration using the data model tree. Alternatively, upload the script to set related parameters.


On the phone web page, choose Preferences > Ringtone. Choose Ringtone Parameter Settings and set related parameters.

Parameter Settings

Table 5-2 describes the distinctive ring parameters and how to set them.


RingFiledX indicates the X-th ringtone parameter, and the value of X ranges from 1 to 10.

Table 5-2 Parameter description



How to Set

How to Modify the Configuration File


Default ring tone.

Value: 0–255 bytes

Location: Device > UserCfg > Ring

Example: DefaultRing="Beep.wav"


Ring tone for intranet calls.

Value: 0–255 bytes

Location: Device > UserCfg > Ring

Example: InNetRing="Beep.wav"


Ring tone for extranet calls.

Value: 0–255 bytes

Location: Device > UserCfg > Ring

Example: OutNetRing="Beep.wav"


Ring tone for calls destined for hunt groups.

Value: 0–255 bytes

Location: Device > UserCfg > Ring

Example: HuntGroupRing="Beep.wav"


Ring tone for reminder calls.

Value: 0–255 bytes

Location: Device > UserCfg > Ring

Example: WakeUpRing="Beep.wav"


Ringtone header field.

Value: a string of 0–255 bytes

The value of this parameter must be the same as that of the corresponding ring header field on the server.

Location: Device > ComCfg > DistinctRing


The value of Parameter can contain letters, digits, and underscores (_) only.

Example: RingFiled1="pattern3"


Ringtone name.

Value: a string of 0–255 bytes

Set this parameter as required.

Location: Device > ComCfg > DistinctRing

Example: Ringname1="Beep.wav"

Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21990

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next