No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Server

Server

This section describes how to configure the network environment and servers (such as the SIP server, directory server, and upgrade server) for the IP phone.

NOTE:

If the SIP server address, SIP server port, proxy server address, and proxy server port are specified in both Account Setting and Server, the settings in Account Setting prevails.

Setting Parameters on the Web Page

  1. Access the phone web page as an administrator. For details, see Web Page Access.
  2. Choose Advanced > Server.

    The Server page is displayed, as shown in Figure 6-5.

    Figure 6-5 Server

  3. Set parameters (see Table 6-10 for detailed parameter descriptions).

    Table 6-10 Parameter description

    Parameter

    Description

    How to Set

    How to Modify the Configuration File

    Network Environment

    Indicates the network environment of the IP phone, with six options available: EC6.X, UC2.X, BroadWorks, IMS, CC, and Others.

    After the network environment is changed, the IP phone changes the default configuration file and the default service rights in service rights management accordingly. This facilitates the setting and use of the IP phone.

    Set this parameter based on requirements. When the IP phone interworks with other third-party SIP servers, set this parameter to Others.

    Default: UC2.X

    NOTE:

    A phone restart is required to make the modified network environment take effect.

    Parameter: NetworkingEnvironment

    Location: Device > ComCfg > Phone > Environment

    Value range: 0-11

    • 0: UC2.X
    • 2: Others
    • 4: BroadWorks
    • 5: CC
    • 9: IMS
    • 10: EC6.X
    • 11: VFOneNet

    Default: 0

    Example: NetworkingEnvironment="10"

    Login Type

    • In the EC6.X network environment, by default, the account is used.
    • In the UC2.X network environment, you can log in to your phone using the phone number or AD domain account. By default, the phone number is used. When the AD domain account is used for login, you must enter the AA server address and port number.
    • In the IMS network environment, the user name is also required in number login.

    Set this parameter based on requirements.

    • Account Login: An account (for example, w00666666) will be used for logging in to the IP phone.
    • Number Login: A phone number (for example, 0571666666) will be used for logging in to the IP phone.
    NOTE:
    • If an account is used, the AA server authenticates the account. When the account is successfully authenticated, the AA server delivers a phone number corresponding to this account to the IP phone for registration.
    • In the EC6.X network environment, when an account is used for login, the uPortal server authenticates the account.

    Parameter: AccessType

    Location: UIEMUser

    Value: 0 or 1

    • 0: phone number
    • 1: account

    Default: 0

    Example: AccessType="1"

    Disaster Recovery

    • Sequential: The IP phone sends registration messages to a SIP server at intervals of half of the registration interval. If the active SIP server fails, the IP phone registers with the standby SIP server. If the standby SIP server also fails, the IP phone registers with the local SIP server. Services are interrupted during the SIP server switching. After the IP phone registers with a SIP server successfully, its services become available again.
    • Simultaneous: The IP phone registers with the active, standby, and local SIP servers at the same time. If the active SIP server fails, the standby SIP server takes over the services. If the standby SIP server also fails, the local SIP server takes over the services. The switching takes about 3s, which is insensible to users. After the switching, services are running properly.

    Default:

    In a UC2.X, EC6.X, or IMS network environment, the default value is Sequential.

    Parameter: DisasterRecoveryMode

    Location: Device > ComCfg > Phone > Environment

    Value range: 0 or 1

    • 0: Sequential
    • 1: Simultaneous

    Example: DisasterRecoveryMode="1"

    SIP Server

    Specifies the phone registration mode and the SIP server address.

    NOTE:

    Server 1, Server 2, Server 3, Server 4, and Server 5 represent the active SIP server, standby SIP server, standby SIP server 2, standby SIP server 3, and local SIP server respectively.

    When the server switches to Server 4 or Server 5, is displayed in the status bar of the phone.

    Enter the IP address of the SIP server based on your network environment.

    • In an EC6.X network environment, the SIP server is the USM server. Enter the domain name of the USM server.
    • In a UC2.X network environment, the SIP server is a gateway of the eSpace U1900 series or EGW1500 series.
    • In an IMS network environment, this parameter is set by the administrator.
    • In a CC network environment, the SIP server is a gateway of the eSpace U2900 series, a UAP3300, or a Session Border Controller (SBC).
    • In a third-party SIP server network environment, the SIP server is a third-party SIP server.

    Parameters: PrimaryRegServerAddress, BackupRegServerAddress, and LocalRegServerAddress

    Location: Device > ComCfg > Phone > Server

    Setting:

    • PrimaryRegServerAddress: Set this parameter to the address of the active SIP server.
    • BackupRegServerAddress: Set this parameter to the address of the standby SIP server.
    • BackupRegServer2Address: Set this parameter to the address of standby SIP server 2.
    • BackupRegServer3Address: Set this parameter to the address of standby SIP server 3.
    • LocalRegServerAddress: Set this parameter to the address of the local SIP server.

    Example: PrimaryRegServerAddress="192.168.1.9"

    SIP Server Port

    Indicates the port number of the SIP server.

    Enter the port number of the SIP server based on your network environment.

    • In an IMS network environment, this parameter is set by the administrator.
    • In a UC2.X, EC6.X or CC network environment, use the default value 5060. However, if 5060 is used for SIP signaling transmission, set the port number of the SIP server to 5061.
    • In a third-party SIP network environment, set this parameter to the port number of the third-party SIP server in use.

    Parameters: PrimaryRegServerPort, BackupRegServerPort, and LocalRegServerPort

    Location: Device > ComCfg > Phone > Server

    Setting:

    • PrimaryRegServerPort: Set this parameter to the port number of the active SIP server.
    • BackupRegServerPort: Set this parameter to the port number of the standby SIP server.
    • BackupRegServer2Port: Set this parameter to the port number of standby SIP server 2.
    • BackupRegServer3Port: Set this parameter to the port number of standby SIP server 3.
    • LocalRegServerPort: Set this parameter to the port number of the local SIP server.

    Example: PrimaryRegServerPort="5060"

    Proxy Server

    Indicates the address of the proxy server.

    The IP phone registers with the proxy server with preference. If the proxy server address you have specified is incorrect, the IP phone will continue its attempt to register with this incorrect address and does not register with the SIP server. This will cause a registration failure.

    In an EC6.X network environment, enter the signaling IP address of the USM.

    In an IMS network environment, this parameter is set by the administrator.

    Parameters: CallOutProxyServerAddress, CallOutBackupServerAddress, and CallOutLocalServerAddress

    Location: Device > ComCfg > Phone > Server

    Setting:

    • CallOutProxyServerAddress: Set this parameter to the address of the active proxy server.
    • CallOutBackupServerAddress: Set this parameter to the address of the standby proxy server.
    • CallOutProxyServer2Address: Set this parameter to the address of standby proxy server 2.
    • CallOutProxyServer3Address: Set this parameter to the address of standby proxy server 3.
    • CallOutLocalServerAddress: Set this parameter to the address of the local proxy server.

    Example: CallOutProxyServerAddress="192.168.1.10"

    Proxy Server Port

    Indicates the port number of the proxy server.

    In an IMS network environment, this parameter is set by the administrator.

    Parameters: CallOutProxyServerPort, CallOutBackupServerPort, and CallOutLocalServerPort

    Location: Device > ComCfg > Phone > Server

    Setting:

    • CallOutProxyServerPort: Set this parameter to the port number of the active proxy server.
    • CallOutBackupServerPort: Set this parameter to the port number of the standby proxy server.
    • CallOutProxyServer2Port: Set this parameter to the port number of standby proxy server 2.
    • CallOutProxyServer3Port: Set this parameter to the port number of standby proxy server 3.
    • CallOutLocalServerPort: Set this parameter to the port number of the local proxy server.

    Example: CallOutProxyServerPort="5060"

    uPortal Server

    Indicates the address of the uPortal server, which must be set in an EC6.X network environment.

    Set this parameter to the uPortal server address. Obtain the address from your network administrator.

    The value can be an IP address or a domain name.

    Example: 192.168.1.237 or test.example.com

    NOTE:

    The uPortal server supports HTTPS by default.

    Parameters: UPortalServerAddress

    Location: Device > ComCfg > Phone > Server

    Example: UPortalServerAddress="192.168.1.237" or UPortalServerAddress="test.example.com"

    uPortal Server Port

    Indicates the port number of the uPortal server.

    Set this parameter to the port number of the uPortal server.

    Default value: 443

    Parameters: UPortalServerPort

    Location: Device > ComCfg > Phone > Server

    Setting:

    UPortalServerPort: Set this parameter to the port number of the active uPortal server.

    Example: UPortalServerPort="443"

    Directory Server

    • In an EC6.X network environment, select uPortal.
    • Specifies either a UC directory server or an LDAP directory server in a UC2.X network environment.
    • In an IMS network environment, the value is delivered by the uPortal server.
    • Specifies only an LDAP directory server in other network environments.

    Image Server

    Indicates the profile picture server that stores contact profile pictures.

    In an IMS network environment, the value is delivered by the uPortal server.

    Enter the address and port number of the image server.

    If both active and standby profile picture servers have been deployed, set Server 1 to the address of the active profile picture server and Server 2 to the address of the standby profile picture server.

    Default: 8081

    Parameters: primaryAdd, primaryPort, backupAddr, and backupPort

    Location: Device > ComCfg > ImageServer

    Example: primaryAddr="192.168.1.35", primaryPort="8081", backupAddr="192.168.1.36", and backupPort="8081"

    Profile Server

    Indicates the profile server that stores the contacts, call history, and configuration file in a UC2.X, EC6.X or IMS network environment.

    For detailed configurations, see Extension Mobility.

    Upgrade Server

    Indicates the upgrade server address.

    Set this parameter to the URL of the UPF file, in format of https://Upgrade server IP address:Port number/File directory/UPF file name.

    Parameter: UPFURL

    Location: Device > ComCfg > UPFSeverInfo

    Example: UPFURL="https://10.166.102.110:80/directory/UPF-HUAWEI_ IP_Phone_7920.xml"

    Diagnostics Server

    Address of the Diagnostics server.

    The diagnostics server address can be server IP address or domain name.

    Parameter: ServerURL

    Location: Device > ComCfg > Log

    Example:ServerURL="10.166.102.110" or ServerURL="Log.example.com"

    CA Server

    Indicates the certificate server address.

    See Multi-Certificate Support.

    XML Delivery Server

    Indicates whether to enable the push server function.

    Enable: yes

    Disable: no

    Parameter: enable

    Location: "Device > ComCfg > XMLPushServer"

    Example: enable="0"

    XML Delivery Server

    Indicates the address of the XML delivery server.

    Set this parameter to the address of the XML delivery server.

    Parameter: XMLPushServer

    Location: Device > ComCfg > XMLPushServer

    Example: addr="10.166.47.45"

    XML Delivery Server Port

    Indicates the port number of the XML delivery server.

    Set this parameter to the port number of the XML delivery server.

    Default: 80

    Parameter: XMLPushServer

    Location: Device > ComCfg > XMLPushServer

    Example: port="80"

    XML Delivery Server Authentication

    Indicates whether to enable authentication for the XML delivery server. If authentication is enabled, the XML delivery server sends XML messages only to authenticated users.

    Select Enable or Disable.

    Parameter: XMLPushServer

    Location: Device > ComCfg > XMLPushServer

    Value range: 0 or 1

    • 0: Disable
    • 1: Enable

    Example: enableAuth="1"

Configuring the Network Environment and Servers on the LCD Screen

  1. Choose Advanced > Server on the LCD screen as an administrator. For details, see Advanced Screen Access.
  2. Set parameters listed in Table 6-11.

    Table 6-11 Server parameters on the LCD screen

    Parameter

    Description

    How to Set

    Network Environment

    Indicates the network environment of the IP phone, with six options available: EC6.X, UC2.X, BroadWorks, IMS, CC, and Others.

    After the network environment is changed, the IP phone changes the default configuration file and the default service rights in service rights management accordingly. This facilitates the setting and use of the IP phone.

    Set this parameter based on requirements. When the IP phone interworks with other third-party SIP servers, set this parameter to Others.

    Default: UC2.X

    NOTE:

    A phone restart is required to make the modified network environment take effect.

    SIP Server

    Specifies the phone registration mode and the SIP server address.

    NOTE:

    Server 1, Server 2, Server 3, Server 4, and Server 5 represent the active SIP server, standby SIP server, standby SIP server 2, standby SIP server 3, and local SIP server respectively.

    When the server switches to Server 4 or Server 5, is displayed in the status bar of the phone.

    Enter the IP address of the SIP server based on your network environment.

    • In an EC6.X network environment, the SIP server is the USM server. Enter the domain name of the USM server.
    • In a UC2.X network environment, the SIP server is a gateway of the eSpace U1900 series or EGW1500 series.
    • In an IMS network environment, this parameter is set by the administrator.
    • In a CC network environment, the SIP server is a gateway of the eSpace U2900 series, a UAP3300, or a Session Border Controller (SBC).
    • In a third-party SIP server network environment, the SIP server is a third-party SIP server.

    SIP Server Port

    Indicates the port number of the SIP server.

    Enter the port number of the SIP server based on your network environment.

    • In an IMS network environment, this parameter is set by the administrator.
    • In a UC2.X, EC6.X or CC network environment, use the default value 5060. However, if 5060 is used for SIP signaling transmission, set the port number of the SIP server to 5061.
    • In a third-party SIP network environment, set this parameter to the port number of the third-party SIP server in use.

    Proxy Server

    Indicates the address of the proxy server.

    The IP phone registers with the proxy server with preference. If the proxy server address you have specified is incorrect, the IP phone will continue its attempt to register with this incorrect address and does not register with the SIP server. This will cause a registration failure.

    In an EC6.X network environment, enter the signaling IP address of the USM.

    In an IMS network environment, this parameter is set by the administrator.

    Proxy Server Port

    Indicates the port number of the proxy server.

    In an IMS network environment, this parameter is set by the administrator.

    uPortal Server

    Indicates the address of the uPortal server, which must be set in an EC6.X network environment.

    .

    Set this parameter to the uPortal server address. Obtain the address from your network administrator.

    uPortal Server Port

    Indicates the port number of the uPortal server.

    Set this parameter to the port number of the uPortal server.

    Default value: 443

    Directory

    Directory Server

    • In an EC6.X network environment, select uPortal.
    • Specifies either a UC directory server or an LDAP directory server in a UC2.X network environment.
    • In an IMS network environment, the value is delivered by the uPortal server.
    • Specifies only an LDAP directory server in other network environments.

    Image Server

    Indicates the profile picture server that stores contact profile pictures.

    In an IMS network environment, the value is delivered by the uPortal server.

    Enter the address and port number of the image server.

    If both active and standby profile picture servers have been deployed, set Server 1 to the address of the active profile picture server and Server 2 to the address of the standby profile picture server.

    Default: 8081

    Profile Server

    Indicates the profile server that stores the contacts, call history, and configuration file in a UC2.X, EC6.X or IMS network environment.

    For detailed configurations, see Extension Mobility.

    Upgrade Server

    Indicates the upgrade server address.

    Set this parameter to the URL of the UPF file, in format of https://Upgrade server IP address:Port number/File directory/UPF file name.

    CA Server

    Indicates the certificate server address.

    See Multi-Certificate Support.

    XML Delivery Server

    Indicates the address of the XML delivery server.

    Set this parameter to the address of the XML delivery server.

    XML Delivery Server Port

    Indicates the port number of the XML delivery server.

    Set this parameter to the port number of the XML delivery server.

    Default: 80

    ACS Server

    Indicates the address corresponding to the TR069 service on the DMS.

    Set this parameter to the ACS server address. For details about the format, see section TR069.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21715

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next