No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IP Phones (Optional)

Configuring IP Phones (Optional)

When you use the TMS to configure IP phones in a management domain, you need to run the TR-069 script to deliver configuration files to the IP phones.

Creating a TR-069 Script

  • You have set up the HTTP server.
  • You have obtained the upgrade and configuration files for the target version.

    Log in to, choose Support > Enterprise Communications > Endpoints, click the corresponding IP phone model, and download the documents of the corresponding version.


This section describes how to create a TR-069 script on the TMS.

  1. Log in to the TMS and click the Subscriber/Device Inventory tab. On the Subscriber/Device Inventory tab page, under TR-069 Script, click Add, as shown in Figure 4-38.

    • If you have an existing .xml file containing TR-069 scripts, click Import to directly import the .xml file into the TMS.
    • If you want to create an .xml file containing TR-069 scripts, log in to, download the software package of the corresponding IP phone model and version, obtain the ipphone_tr069script_demo.xml template file in the dms folder obtained after the software package is decompressed, and enter TR-069 parameters according to the samples in the template. For details about the TR-069 parameters and their values, see the TR-069 Configuration Parameter Description.
    Figure 4-38 Creating a TR-069 script

  2. Under Add TR-069 Script, set parameters and click Add, as shown in Figure 4-39.

    Figure 4-39 Setting TR-069 script parameters

  3. In the Add TR-069 Script Entry area, perform the following operations:

    1. Set TR-069 Method Name to SetParamterValues.
    2. Add parameters and set related parameter types and values, as shown in Figure 4-40. The successfully added parameters are displayed in the lower part.
      1. For the IP phones that are newly delivered, set the basic parameters described in Table 4-6.
      2. For the phones that are restored to factory settings, deliver related parameters based on the site requirements.
      • For details about TR-069 names, types, and values, see the TR-069 Configuration Parameter Description.
      • To set the IP address of the IP phone through the TMS, deliver the corresponding TR-069 parameters in the Device.ComCfg.Access.LAN. path.
      Figure 4-40 Creating a TR-069 script entry
      Table 4-6 TR-069 parameter description

      Parameter Name

      Parameter on the ACS



      SIP server address


      string(63) USM domain name

      Proxy server address



      Signaling IP address of the USM

      Network environment



      10: EC6.X network environment

      Login mode



      1: Account

      NMS type



      1: TMS




      0: disable


      In the EC6.X network environment, set this parameter to 0. Then the line button settings are delivered by the uPortal. In the other scenarios, if the server cannot deliver the line button settings, set this parameter to 1. Then the IP phone automatically generates line button settings.

  4. Click Submit. The Add TR-069 Script page is displayed.
  5. Check the newly added script on the TR-069 Script page.

Running a TR-069 Script

  1. Log in to the TMS. In the left pane on the right of the Subscriber/Device Search tab page, select the management domain.
  2. Under Subscriber ID, select IP phones that you want to configure and click Apply, as shown in Figure 4-41.

    Figure 4-41 Selecting devices

    If selecting multiple IP phones of the same model, you can run the script on selected IP phones to deploy them in batches.

  3. On the Subscriber/Device Operation tab page, select TR-069 Script.
  4. Select the device firmware version and click Next.

    Figure 4-42 Selecting the device firmware version

  5. Select the script to run and click Next, as shown in Figure 4-43.

    Figure 4-43 Selecting the TR-069 script

  6. Under Task Setting, set task parameters and click Finish, as shown in Figure 4-44.

    Figure 4-44 Setting task parameters


On the Subscriber/Device Operation tab page, select Actions History.

The task status is displayed, as shown in Figure 4-45.

Figure 4-45 Actions History
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21596

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next