No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Up the DHCP Server (IPv4) in the Windows Server 2012

Setting Up the DHCP Server (IPv4) in the Windows Server 2012

Installing the DHCP Server

  1. Choose Start > Control Panel > All Control Panel Items > Administrative Tools, to open the Server Manager.

    Figure 8-12 Server Manager window

  2. Click Add roles and features to access the Add Roles and Features Wizard window. From the navigation tree on the left, choose Server Roles to access the Select server roles window.
  3. Select DHCP Server. In the displayed dialog box, select Add Features and click Next.

    Figure 8-13 Select server roles

  4. In the Select features window, click Next.

    Figure 8-14 Select features

  5. In the DHCP Server window, click Next to access the Confirm installation selections window.

    Figure 8-15 Confirm installation selections

  6. Click Install to start installing the DHCP Server.

    Figure 8-16 Installation progress

  7. A message is displayed asking you to restart the DHCP server to complete its installation.

    Figure 8-17 Results

Authorizing the DHCP Server

  1. After the DHCP server is restarted, open the Server Manager and select the installed DHCP server. The "Configuration required for DHCP Server at XXX" message is displayed in the upper part.

    Figure 8-18 Server Manager window

  2. Click More in the message notification bar to open the All Servers Task Details and Notifications window. Click Complete DHCP configuration in the Action column.

    Figure 8-19 Notifications

    If no message is displayed, you can click Tools in the upper right corner of the Server Manager window and choose DHCP. Then, right-click the server name on the left and choose Authorize.

    Figure 8-20 Dashboard
    Figure 8-21 DHCP

  3. In the DHCP Post- Install configuration wizard window, click Next.

    Figure 8-22 DHCP Post- Install configuration wizard

  4. In the Authorization window, click Commit.

    Figure 8-23 Authorization

  5. In the Summary window, messages indicating that the DHCP server is authorized and the security groups are created are displayed. Click Close.

    Figure 8-24 Summary

Configuring a Scope

  1. Open the Server Manager. From the navigation tree on the left, choose DHCP. In the pane on the right, right-click the DHCP server and choose DHCP Manager.


    You can also click Tools in the upper right corner and choose DHCP, as shown in Figure 8-20.

  2. Expand the navigation tree on the left, right-click IPv4, and choose New Scope.

  3. In the New Scope Wizard window, click Next.

  4. Set Scope Name (for example, to and click Next.

  5. Set the IP Address Range.

    For example, set Start IP address to and End IP address to

  6. Set exclusives and delay.

  7. Set the lease duration (8 days by default) and click Next.

  8. In the Configure DHCP Options window, select Yes, I want to configure these options now and click Next to configure DHCP options (gateway/DNS/domain name).

  9. Set the default gateway (for example, and click Add. Then, click Next.

  10. Set the DNS server name and IP address.

  11. In the WINS Servers window, leave the parameters empty as you do not need to set WINS servers. Click Next.

  12. In the Activate Scope window, select Yes, I want to activate this scope now and click Next.

  13. Click Finish to complete the new scope wizard.

Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21974

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next