No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Service Rights Management

Service Rights Management

This section describes how to manage phone service rights.

Prerequisites

Related service rights have enabled on the SIP server. For details about how to configure service rights on the SIP server, see the eSpace EC Product Documentation or the product documentation of the gateway that serves as the SIP server.

NOTE:

For details about how to obtain related documents, see Obtaining Reference Documents.

Context

Before using a service, enable the service rights for the IP phone by following the two steps below:

  1. Set Authorized.

    In the configuration file, the parameter corresponding to Authorized is ServiceRight with two options:

    • 0: disables a service right.
    • 1: enables a service right.
  2. Enter the enable access code and disable access code.

    In the configuration file, the parameters corresponding to the enable and disable access codes are ActiveAccessCode and DeactiveAccessCode.

NOTE:
  • In an EC6.X network environment, the service rights and service status modified on the USM or uPortal server are pushed to the IP phone in real time.
  • In a UC2.X network environment, the service rights and service status modified on the U1900 series gateway or BMU are pushed to the IP phone in real time.
  • Service rights are account-specific. Therefore, select an account first.
  • The service status display is phone-specific. If the service status display of an account takes effect, the IP phone displays the corresponding status. For example, if DND is enabled for an account of the IP phone, the IP phone displays the DND icon in the status bar. However, the accounts with DND disabled can still answer incoming calls.

Configuration Methods

You can manage service rights using three different methods, as listed in Table 5-13.

Table 5-13 Configuration methods

Method

Details

eSight

On the eSight management portal, choose Resource > Collaboration Resource > Terminal Device Management > Deployment Management > Configuration file. Select the corresponding configuration file, click , and expand the configuration items. Click the Service Rights Management tab and set related parameters on the page that is displayed.

TMS

Log in to the TMS and click the Subscriber/Device Operation tab. In the pane on the left of the window, click Data Model Tree. Deliver the configuration using the data model tree. Alternatively, use the TR-069 script to set related parameters.

DHCP Option 246

Set related parameters in the configuration file and deliver the new configuration file to the IP phone.

Web

On the phone web page, choose Advanced > Service Rights Management and set related parameters on the page that is displayed.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 24069

Downloads: 52

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next