No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deploying IP Phones in Batches

Deploying IP Phones in Batches

IP phones can be deployed in batches either manually or automatically. Manual deployment applies to deployment of existing IP phones, and automatic deployment applies to IP phones deployed at a new site.

Deploying IP Phones Manually

Prerequisites

IP phones have been connected to eSight. For detail, see Configuring the Connection Between an IP Phone and eSight.

Procedure
  1. Log in to the eSight web management system. On the menu bar, choose Resource > Collaboration Resource > Terminal Device Management.
  2. In the navigation tree on the left, choose Deployment Management > Manual Deployment.
  3. On the Manual Deployment tab page, click Create.
  4. Under Task Set, set Task Name and click Next.

    Figure 4-18 Create Task

  5. Under Select Device, click Add.
  6. In the Select Resource window, select a group or IP phones.

    • You can select any group under Select Group. Deployment will be performed on IP phones in the selected group, as shown in Figure 4-19.
      Figure 4-19 Selecting a group
    • You can select one or multiple IP phones under Select Terminal. Deployment will be performed only on selected phones, as shown in Figure 4-20.
      Figure 4-20 Selecting IP phones
      NOTE:

      You can select a group under Select Group and one or multiple IP phones under Select Terminal at the same time. It is recommended that you reserve 0.5 Mbit/s bandwidth for each IP phone in concurrent deployment.

  7. Click OK.
  8. Click Next.
  9. Under Select Upgrade Type, select Main Firmware and Configuration File, as shown in Figure 4-21.

    Figure 4-21 Selecting Task Type
    NOTE:

    IP phones not in factory default settings can check whether there is a new version during restart and implement automatic upgrade. In this case, set the task type to Reboot.

  10. Under Select Upgrade Type, select an upgrade type based on the site requirements, as shown in Figure 4-22.

    Figure 4-22 Selecting Upgrade Type
    NOTE:
    • For manual deployment, you need select at least Main Firmware or Configuration File. Otherwise, you cannot proceed to the next step.
    • If you need to manually deliver numbers, you must also upgrade the configuration file.
    • Batch number delivery through eSight is supported during manual IP phone deployment. Before creating the number delivery task, you need to record number resources into eSight first. For details about how to record number resources into eSight, see Managing IP Phone Number Resources.
    • Upgrading the main firmware
      1. Under Select Upgrade Type, select Main Firmware.
      2. In the Target Version/File column under Version File Upgrade, select the target version file that has been uploaded. For details about how to upload a version file, see Managing Version Files.

    • Upgrading the configuration file
      1. Under Select Upgrade Type, select Configuration File.
      2. In the Target Version/File column under Version File Upgrade, select the target configuration file that has been uploaded. For details about how to upload a configuration file, see Managing Configuration Files.

    • Delivering numbers
      1. Under Select Upgrade Type, select Configuration File and Dispatch Number.
        NOTE:

        If Switch of Number Allocation is set to uPortal dispatch Number, the Dispatch Number option is not displayed in Select Upgrade Type.

      2. In the Target Version/File column under Version File Upgrade, select the target configuration file that has been uploaded. For details about how to upload a configuration file, see Managing Configuration Files. For details about how to record number resources into eSight, see Managing IP Phone Number Resources.

  11. Click Next. The confirmation page is displayed.
  12. Confirm the deployment and click Finish.
Verification
  1. Log in to the eSight web management system. On the menu bar, choose Resource > Collaboration Resource > Terminal Device Management.
  2. In the pane on the left of the tab page, choose Deployment Management > Manual Deployment

    On the Manual Deployment tab page, the manual deployment task status is displayed.

Deploying IP Phones Automatically

Automatic deployment applies to new sites where new IP phones are to be deployed in batches. Automatic deployment supports the number allocation function.

Procedure
  1. Log in to the eSight web management system. On the menu bar, choose Resource > Collaboration Resource > Terminal Device Management.
  2. In the navigation tree on the left, choose Deployment Management > Automatic Deployment Management.
  3. On the Automatic Deployment tab pate, click in the row of the IP phone group to be deployed.

    NOTE:
    • If Type of dispatchNumber is set to uPortal dispatchNumber, the Allocated Number Segment configuration item will not be displayed on the automatic deployment configuration page.
    • If the administrator has changed the passwords of user numbers on the BMU, synchronize number resources on eSight before automatically allocating numbers; otherwise, number allocation may fail.
    • Upgrading the main firmware

      Click in the Associate Version File column of the IP phone group to select version files for IP phone models involved in the IP phone group. For details about how to upload a version file, see Managing Version Files.

    • Upgrading the configuration file

      Click in the Associate Configuration File column of the IP phone group to select configuration files for IP phone models involved in the IP phone group. For details about how to upload a configuration file, see Managing Configuration Files.

    • Delivering numbers

      Click in the Allocated Number Segment column of the IP phone group to set the number segment of numbers to be allocated. For details about how to upload a configuration file, see Managing Configuration Files. For details about how to record number resources into eSight, see Managing IP Phone Number Resources.

  4. (Optional) Click in the Subnet Bandwidth column of the IP phone group to set the maximum bandwidth that the subnet can use during IP phone deployment.

    NOTE:
    • It is recommended that you reserve 0.5 Mbit/s bandwidth for each IP phone in concurrent deployment.
    • You are NOT advised to deploy more than 100 IP phones simultaneously.

Viewing the Automatic Deployment Task

In the pane on the left of the tab page, choose Deployment Management > Automatic Deployment > Task View. On the Automatic Deployment tab page, the automatic deployment task status is displayed, as shown in Figure 4-23.

Figure 4-23 Viewing the deployment task status
NOTE:

The automatic deployment task is named Auto Deploy Task by eSight.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21713

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next