No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Redirection Server Parameters

Setting Redirection Server Parameters


To provide IP phone users with zero-configuration experience, IP phones support the built-in redirection server address. The redirection server is deployed by Huawei on the Internet (Huawei public cloud) and is used to deliver the ACS server URL to IP phones.

The system administrator needs to collect IP phone SNs, create accounts and provision services on the uPortal based on IP phone SNs, and create the deployment task on the ACS server in advance. When being powered on for the first time, an IP phone automatically initiates a request to the redirection server for obtaining the local ACS server URL. When connecting to the ACS server, the IP phone automatically obtains the account and completes the registration. In this way, IP phone users only need to power on their IP phones and connect them to the network to complete the registration and login.

You can set redirection server parameters in either of the following modes:
  • Set redirection server parameters on the USM.
  • Set redirection server parameters on eSight.

This section describes how to set redirection server parameters on eSight. For details about how to set redirection server parameters on the USM, see the CloudEC Product Documentation.

Enabling the Redirection Server on the eSight

The redirection server is disabled by default. You need to log in to the eSight and enable the redirection server first.

  1. Use the PuTTY tool to log in to the eSight using the default user name and password (root and Changeme123, respectively).
  2. Run the cd /opt/eSight/AppBase/etc/uc command and press Enter.
  3. Run the vi command and press Enter.
  4. Press Insert and set configcenter.enable to true.
  5. Press Esc to exit the editing status.
  6. Enter the :wq command to exit.
  7. Restart the eSight.

Setting Redirection Server Parameters

  1. Log in to the eSight web management system as the administrator.
  2. Choose Resource > Collaboration Resource > Terminal Device Management.
  3. Add the ACS server.

    1. Choose Terminal Device Management > Redirect Center > Config Server.
    2. Click Add.
    3. Set Server Name and ACS Url, as shown in Figure 4-4.
      Figure 4-4 Adding a server

  4. Add a terminal.

    1. Choose Terminal Device Management > Redirect Center > Terminal.
    2. Click Add.
    3. Enter an IP phone SN and select a server, as shown in Figure 4-5.
      Figure 4-5 Adding a terminal

Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21750

Downloads: 46

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next