No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using Web

Using Web

This section describes how to configure a single HUAWEI IP Phone 7920/7960 on the phone web page.

Prerequisites

You have obtained the IP address of the phone to configure and the SIP server IP address. For details, see Required Data.

Context

HUAWEI IP Phone 7920/7960 can connect to a network through the web page, and this web-based network access applies to the configuration of a single HUAWEI IP Phone 7920/7960. This section uses HUAWEI IP Phone 7920/7960 in a UC2.X server network as an example to describe how to set the server parameters for HUAWEI IP Phone 7920/7960 on the web page.

For details about how to set the service parameters, see Service Configuration.

Procedure

  1. Configure the IP address for HUAWEI IP Phone 7920/7960. For details, see Configuring the Phone IP Address.
  2. Access the phone web page. The default user name is admin and the default password is admin123.

    NOTE:

    Change your user name and password at your first login to ensure security. Ensure that the password meets complexity requirements.

  3. Choose Advanced > Server.

    The Server page is displayed.

  4. Set server parameters (see Figure 4-50 for detailed parameter descriptions).

    Figure 4-50 Setting server parameters

  5. Click Save.

Follow-up Procedure

Power on HUAWEI IP Phone 7920/7960 and log in using the registered account. All the basic call functions of HUAWEI IP Phone 7920/7960 will be available at this point.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 23667

Downloads: 48

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next