No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading IP Phones(Optional)

Upgrading IP Phones(Optional)

Procedure

  1. Choose the Subscriber/Device Inventory > Firmware Inventory.
  2. Click Add, add a firmware file, as shown in Figure 4-33.

    NOTE:
    • The firmware version name must be the actual version name. You can open the DD file using a text editor and search for firmwareVersion to obtain the firmware version name. For example, if <firmwareVersion>V600R006C00B021</firmwareVersion> is found, the firmware version name is V600R006C00B021.
    • The version file to be uploaded must be in .bin format.
    • If the upload fails due to the excess file size, modify the maximum permitted firmware file size under System Management > Preferences > Firmware Upgrade Settings.
    Figure 4-33 Adding a firmware file

  3. Click the Subscriber/Device Search tab, find and select the IP phones to be upgraded, click Apply, and access the Subscriber/Device Operation tab page.

    You can select multiple IP phones of the same model, click Apply All, and execute the scripts in batches for batch deployment.

  4. Choose F/W Upgrade from the navigation tree on the left and click Continue in the pane on the right, as shown in Figure 4-34.

    Figure 4-34 Firmware Upgrade

  5. Select the firmware version to be upgraded and click Next, as shown in Figure 4-35.

    Figure 4-35 Selecting firmware version

  6. Create an upgrade task and click Finish.

    Figure 4-36 Setting a task

Verification

Choose Subscriber/Device Operation > Actions. Query the created task on the page that is displayed, as shown in Figure 4-37.

Figure 4-37 Upgrade task
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21381

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next