No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Quick Configuration (for a Single Phone)

Quick Configuration (for a Single Phone)

This section describes how to quickly configure a single HUAWEI IP Phone 7920/7960 on the web page.

Prerequisites

  • You have obtained the server and account information (listed in Table 7-1) from your network administrator.
Table 7-1 Data plan for single phone configuration

Parameter

Example

Description

Network Environment

EC6.X

Indicates the network environment of the IP phone.

SIP Server

192.168.1.10

Indicates the IP address of the SIP server in a UC2.X, EC6.X, CC, or third-party SIP server network environment.

Port

5060

Indicates the port number of the SIP server in a UC2.X, EC6.X, CC, or third-party SIP server network environment.

Account

866666

Indicates the phone account assigned by the SIP server.

User Name

EC6.X, UC2.X, CC, or third-party network environment: 866666

Indicates the user name.

The user name is the same as the account in a UC2.X, EC6.X, CC, or third-party network environment.

Password

User@123456

Indicates the password for the phone account assigned by the SIP server.

  • You have obtained the phone IP address (which is generally assigned by the DHCP server). If a static IP address is required, you need to obtain the static IP address, subnet masks, gateway address, and active and standby DNS server addresses from your network administrator.
  • You have obtained the switch VLAN information. Generally, the switch automatically delivers VLAN information using LLDP. If the VLAN information needs to be manually configured, you need to obtain the phone VLAN ID and priority, and PC port VLAN ID and priority from your network administrator.

Context

The quick configuration can be used when only a few IP phones need to be configured after batch deployment.

Procedure

  1. Connect the network cable and power cable of HUAWEI IP Phone 7920/7960, and power on HUAWEI IP Phone 7920/7960.
  2. Configure the IP address for HUAWEI IP Phone 7920/7960.

    • If the IP address is obtained in DHCP mode, on the phone login screen, press the Network softkey and use navigation buttons to access the Status > Network screen. Record the IP address of HUAWEI IP Phone 7920/7960.
    • If a static IP address is used, set the IP address according to the data plan.
      1. On the phone login screen, press the Network softkey and choose Network Access > IPv4 Settings > Static.
      2. On the screen that is displayed, fill in the IP address, subnet mask, gateway address, and (optional) DNS server address.
      3. Press the Done softkey.

  3. Access the phone web page as an administrator.

    NOTE:

    The default administrator account is admin, and the default administrator password is admin123. Change the password at your first login to ensure security. Ensure that the password meets complexity requirements.

  4. Choose Advanced > Server. On the page that is displayed, set Network Environment according to the data plan.

    Figure 7-1 Network Environment
    NOTE:

    A phone restart is required for the modified network environment to take effect.

  5. Choose Advanced > Configuration Wizard.

    The Configuration Wizard > Network page is displayed.

  6. Set parameters (see Table 7-2 for detailed parameter descriptions).

    Table 7-2 Parameter description

    Parameter

    How to Set

    Access Authentication

    802.1x

    Enable 802.1x (recommended).

    Link Layer Discovery Protocol

    Link Layer Discovery Protocol

    Enable Link Layer Discovery Protocol (LLDP) if the switch supports LLDP. After LLDP is enabled, HUAWEI IP Phone 7920/7960 obtains VLAN information from the switch at intervals.

    Packet Sending Interval

    Use the default value.

    VLAN

    LAN Port

    Set this parameter depending on your needs. If you select Enable, the VLAN function is enabled for HUAWEI IP Phone 7920/7960.

    ID

    Manually fill out the value according to the data plan if the switch cannot deliver the VLAN ID automatically. This parameter specifies the VLAN ID of the LAN port on HUAWEI IP Phone 7920/7960.

    Priority

    Use the default value (recommended).

    VLAN Filtering on PC Port

    Select Enable if HUAWEI IP Phone 7920/7960 is connected to a PC and if VLAN IDs for the PC and the IP phone need to be differentiated.

    ID

    Manually fill out the value according to the data plan if the switch cannot deliver the VLAN ID automatically. This parameter specifies the VLAN ID of the PC port on HUAWEI IP Phone 7920/7960.

    IPv4 Network Access Mode

    DHCP

    Select this access mode if HUAWEI IP Phone 7920/7960 automatically obtains an IP address from the DHCP server.

    Static

    Use the default value because related values have been configured on the phone LCD screen.

    IPv6 Network Access Mode

    DHCP

    Select this access mode if HUAWEI IP Phone 7920/7960 automatically obtains an IP address from the DHCP server.

    Static

    Set it as planned.

  7. Click Next.

    The Configuration Wizard > Server Setting page is displayed.

  8. Set parameters (see Table 7-3 for detailed parameter descriptions).

    Table 7-3 Parameter description

    Parameter

    How to Set

    SIP Server

    SIP Server 1

    Enter the IP address of the SIP server according to the data plan in a UC2.X, EC6.X, CC, or third-party SIP server network environment.

    Port

    Enter the port number of the SIP server according to the data plan in a UC2.X, EC6.X, CC, or third-party SIP server network environment.

  9. Click Next.

    The Configuration Wizard > Account Setting page is displayed.

  10. Enter the phone account, user name, and password according to the data plan, and click Save.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 21241

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next