No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

HUAWEI IP Phone 7920 and 7960 V600R006C00

Describes the deployment, configuration, and maintenance of HUAWEI IP Phone 7920/7960.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VFOneNet Provision Configuration Guide

VFOneNet Provision Configuration Guide

Context

To implement batch IP phone management, you need to connect IP phones to the public ACS server. After connecting to the public ACS server, IP phones automatically obtain number information and complete SIP registration. Terminal users only need power on IP phones and connect them to the network to complete login and registration. This implements IP phone zero-configuration access.

Figure 8-30 shows the terminal management deployment service process.

NOTE:

This terminal management mechanism does not use Huawei NMS server. Therefore, you need to first use Option 246 to deliver the Bootstrap NMS address, user name, and password to IP phones. Then, IP phones can obtain the public ACS server address from the Bootstrap NMS. The access mode of "DHCP + two NMSs" is insecure and applies only to the specific customer. It is not recommended in other scenarios.

Figure 8-30 Service process

1. The DHCP Option246 parameters (BootStrap ACS address, and user name and password used to access the ACS) are set. For details, see Configuring Option 246.

2-4. After the IP Phone is power on, the BootStrap ACS address and the user name and password used to access the ACS are obtained from the Option 246 character string value.

5. The IP phone proactively connects to the BootStrap ACS, and the user name and password in Option 246 are used to perform authentication and report the IP Phone and AR information.

6-7. After device verification, the BootStrap ACS uses the SetParameterValues method to deliver the URL, user name, and password of the Public ACS.

8. The IP Phone proactively connects to the Public ACS.

9. The Public ACS uses the Download method to deliver the root certificate to the IP Phone.

10. The IP Phone restarts.

11-12. The Public ACS uses the GetParameterValues method to obtain the certificate name and uses the SetParameterValues method to enable the IP Phone certificate verification.

13. The Public ACS uses the SetParameterValues method to deliver the registration information such as the SIP number and password of the IP Phone.

14. The IP Phone obtains the registration information and initiates SIP registration to the AS.

Table 8-4 describes the TR-069 parameters involved in the process.

Configuring Option 246

This section describes how to configure DHCP Option 246 to implement IP phone zero-configuration access.

For details about how to configure DHCP Option 246, see Setting Option 246 Parameters. In step 10, enter the parameters in String value and separate parameters with the semicolon (;).

For example: acs.address=https://bootstrapacs.vodafone.co.uk:443/cwmpWeb/CPEMgt;acsusr=Vodafone_Huawei;acspsw=548edds899waswe;env=11;sync=0

Table 8-3 Configurate on DHCP Server

No.

Item

Details

Remarks

1

acs.address

acs.address=https://bootstrapacs.vodafone.co.uk:443/cwmpWeb/CPEMgt;

Bootstrap ACS URL

2

acsusr

acsusr=Vodafone_Huawei;

Bootstrap ACS username

3

acspsw

acspsw=548edds899waswe;

Bootstrap ACS password

4

env

env=11

This parameter means interworking with VFOneNet solution.

5

sync

sync=0

  • 0: Modify the ACS information(URI/username/password) only at the first DHCP periodic
  • 1: modify the ACS information every DHCP periodic

Default value: 0

Configuring TR-069

During IP Phone deployment and access, the BootStrap ACS and Public ACS use the SetParameterValues method to deliver key parameters to the IP Phone, and the Public ACS uses the GetParameterValues method to obtain the root certificate name of the IP Phone. Table 8-4 describes the parameters.

Users can deliver other TR-069 parameters as required. For details, see the TR-069 Configuration Parameter Description and Configuration File Parameter Description.

Table 8-4 TR-069 parameter description

Field

ACS Parameter

Parameter Type

Description

URL

Device.ManagementServer.URL

string(127)

URL of the Public ACS, in https://Public ACS address:8444/tr069/services/acs format.

Example: https://10.184.93.173:8444/tr069/services/acs

Username

Device.ManagementServer.Username

string(255)

Authentication user name of the Public ACS.

Example: acsusername

Password

Device.ManagementServer.Password

string(255)

Authentication password of the Public ACS.

Example: acsuser@123

enable

Device.UserInterface.X_001E10_HttpsVerifyMode

boolean

Indicates whether to enable certificate verification.

The options are as follows:

  • 0: disable
  • 1: enable

Default value: 0

Example: 1

CertXName

Device.UserInterface.X_001E10_Cert.X_001E10_CertXName

string(255)

Root certificate name of the IP Phone.

Read-only.

NOTE:

In CertXName, X ranges from 1 to 10.

UserName

Device.Services.VoiceService.VoiceProfile.Line.1.SIP.AuthUserName

string(255)

User name used during IP Phone authentication.

Example: user

Passwd

Device.Services.VoiceService.VoiceProfile.Line.1.SIP.AuthPassword

string(255)

Password used during IP Phone authentication.

Example: user@123

Account

Device.Services.VoiceService.VoiceProfile.Line.1.SIP.X_001E10_Account

string(255)

IP Phone account ID used to register with the server.

Example: 80000

LabelName

Device.Services.VoiceService.VoiceProfile.Line.1.SIP.X_001E10_LabelName

string(63)

Label name displayed on the IP Phone for the account.

Example: Jack

PrimaryRegServerAddress

Device.Services.VoiceService.VoiceProfile.Line.1.SIP.RegistrarServer

string(127)

IP address of the active registrar server with which the account is registered.

Example: 10.184.93.20

PrimaryRegServerPort

Device.Services.VoiceService.VoiceProfile.Line.1.SIP.RegistrarServerPort

unsignedInt

Port of the active registrar server with which the account is registered.

Value range: 0-65535

Default value: 5060

Example: 5060

CallOutProxyServerAddress

Device.Services.VoiceService.VoiceProfile.Line.1.SIP.OutboundProxy

string(127)

IP address of the active proxy call server, which is configured on the IP Phone side.

Example: 10.184.93.56

NOTE:

If there is no proxy server onsite, do not set this parameter.

CallOutProxyServerPort

Device.Services.VoiceService.VoiceProfile.Line.1.SIP.OutboundProxyPort

unsignedInt

Port number of the active proxy call server, which is configured on the IP Phone side.

Value range: 0-65535

Default value: 5060

Example: 5060

Verification

After being powered on, IP phones are registered successfully and display the home screen.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100036652

Views: 23541

Downloads: 48

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next