No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Typical Configuration Examples

SD-WAN V100R018C00

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPF Routes

Configuring OSPF Routes

Related Products

Agile Controller-Campus: V300R003C00

AR: V300R003C00

Networking Requirements

Figure 1-10 shows the SD-WAN networking of Enterprise A. On this network, the WAN-side network is a VPLS network, that is, a Layer 2 MPLS network. During the setup of an SD-WAN network, the tenant administrator has created the hub sites and branch sites. Routes need to be configured for the underlay network.

Figure 1-10 Enterprise networking

Solution Design

  1. The MPLS network on the WAN side provides OSPF routes. This allows OSPF routes to be configured on the underlay network for connecting the CPEs to the MPLS network.
  2. OSPF process information needs to be configured on the CPEs of each site to enable interconnection between the site and the MPLS network through OSPF routes. No routing policy needs to be configured because currently there is no need to restrict the network segments in which OSPF routes are advertised and received. This means all OSPF routes are advertised and received in every network segment.

Data Plan

Table 1-49 OSPF routing information at the hub sites

Item

Value

Site

Hub1

Hub2

Device

Hub1_1

Hub1_2

Hub2_1

Hub2_2

Process ID

501

501

501

501

WAN link

MPLS1

MPLS2

MPLS1

MPLS2

Common Parameter

Default route advertisement

ON

ON

ON

ON

Default route cost

1

2

3

4

Internal preference

10

10

10

10

ASE preference

150

150

150

150

Interface Parameter

Area ID

0

0

0

0

Interface Name

GE3/0/0

GE3/0/0

GE3/0/0

GE3/0/0

Authentication Mode

None

None

None

None

Hello Timer

10

10

10

10

DR Priority

0

0

0

0

Cost

-

-

-

-

Route Redistribute

-

-

-

-

Router Filter

Export filter

OFF

OFF

OFF

OFF

Import filter

OFF

OFF

OFF

OFF

Table 1-50 OSPF routing information at the aggregation and branch sites

Item

Value

Site

Agg1

Site2

Site3

Agg2

Site4

Site5

Site6

Device

Agg1_1

Agg1_1

Site2_1

Site2_1

Site3_1

Agg2_1

Site4_1

Site5_1

Site6_1

Process ID

501

502

501

502

501

501

501

501

501

WAN link

MPLS1

MPLS2

MPLS1

MPLS2

MPLS1

MPLS1

MPLS1

MPLS1

MPLS2

Common Parameter

Default route advertisement

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

Internal preference

10

10

10

10

10

10

10

10

10

ASE preference

150

150

150

150

150

150

150

150

150

Interface Parameter

Area ID

0

0

0

0

0

0

0

0

0

Interface Name

GE3/0/0

GE3/0/1

GE0/0/0

GE0/0/4

GE0/0/4

GE3/0/0

GE0/0/4

GE0/0/4

GE0/0/4

Authentication Mode

None

None

None

None

None

None

None

None

None

Hello Timer

10

10

10

10

10

10

10

10

10

DR Priority

0

0

0

0

0

0

0

0

0

Cost

-

-

-

-

-

-

-

-

-

Route Redistribute

-

-

-

-

-

-

-

-

-

Router Filter

Export filter

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

Import filter

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

Procedure

  1. Log in to the Agile Controller-Campus as a tenant administrator.
  2. Finish creating sites.
  3. Configure routes for the underlay network of the hub site.

    1. Choose Configuration > Site > Underlay Configuration.
    2. Select Hub1 from the left list and click WAN Route.
    3. On the WAN Route page that is displayed, click Click Here to Add Routing Protocol and select OSPF.
    4. On the OSPF page, click Create and set OSPF route parameters. On the main page, click Apply Changes.

    5. Configure OSPF routes for Hub2, and click Apply Changes.

  4. Configure routes for the underlay networks of the aggregation sites and branch sites.

    1. In the list on the left, select Agg1, complete the OSPF routes configuration. On the main page, click Apply Changes.

    2. In the list on the left, select Site2, and configure OSPF routes. On the main page, click Apply Changes.

    3. In the list on the left, select Site3, and configure OSPF routes. On the main page, click Apply Changes.

    4. In the list on the left, select Agg2, and configure OSPF routes. On the main page, click Apply Changes.

    5. In the list on the left, select Site4, and configure OSPF routes. On the main page, click Apply Changes.

    6. In the list on the left, select Site5, and configure OSPF routes. On the main page, click Apply Changes.

    7. In the list on the left, select Site6, and configure OSPF routes. On the main page, click Apply Changes.

Translation
Download
Updated: 2019-03-04

Document ID: EDOC1100036696

Views: 17869

Downloads: 116

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next