No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Typical Configuration Examples

SD-WAN V100R018C00

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Replacing Dual Faulty CPE Gateways

Replacing Dual Faulty CPE Gateways

Related Products

Agile Controller-Campus: V300R003C00

AR: V300R003C00

Networking Requirements

A hardware fault occurs on two CPEs at the hub site of an enterprise. The enterprise wants to replace them with new CPEs to restore network services.

Solution Design

  1. Add the new CPEs to the device management system of the Agile Controller-Campus. Ensure that the model of the new CPEs is the same as that of the CPEs to be replaced.
  2. Perform device replacement on the Agile Controller-Campus, select the site at which CPEs need to be replaced, and send a deployment email.
  3. At the site, use the new CPEs to replace the faulty CPEs and connect them to the WAN. Then, deploy the CPEs again.
  4. After the CPEs are deployed, they automatically obtain the modified configuration from the Agile Controller-Campus.

Figure 5-1 shows the detailed operation flowchart.

Figure 5-1 Operation flowchart

Data Plan

Table 5-1 New device information

Device ESN

Device Name

Device Model

2102114484P0GC000720

Hub1_1_new

AR3670

2102114484P0GC000730

Hub1_2_new

AR3670

Procedure

  1. Log in to the Agile Controller-Campus as a tenant administrator.
  2. Add devices in a batch based on the ESN.

    1. Choose Device Management > Device List. The Device List page is displayed.
    2. Click Add Device and set Addition method to Batch import.
    3. Click Template to download the template file.
    4. Fill in the template with required information and save the file.
    5. Click , select the configured template file, and click Upload.
    6. Confirm the imported data, select the data to be created for CPEs, and click OK.

  3. Replace the CPEs.

    1. Choose Device Management > Device List. The Device List page is displayed.
    2. In the device list, find the faulty CPEs. Click in the Operation column of the CPE records.The Device Replacement page is displayed.
    3. In the new device list, select the new CPEs after the replacement and click OK.

    4. After the replacement is successful, the device ESNs are the ESNs of the new CPEs.

  4. Send a deployment email or USB-based deployment files.

    • In email-based deployment, perform the following operations:
      1. Choose Configuration > Site > ZTP Configuration. The ZTP Configuration page is displayed.
      2. Click Send Email. In the displayed Send Email dialog box, select the site to deploy and click .
      3. (Optional) If the mailbox information is not configured when the site is created, specify a recipient email address after you select the site.
      4. Enter the recipient email address and CC email address, select the created email template, modify the email content, and click OK.
    • In email-based deployment, perform the following operations:
      1. Choose Configuration > Site > ZTP Configuration. The ZTP Configuration page is displayed.
      2. Click Download ZTP File to save the file as a ZTP_xxx.csv file.
      3. Make an index file and a configuration file and send them to the deployment engineer. For details, see Step 2 in section USB-based Deployment.

  5. Deploy the new CPEs as a deployment engineer.

  6. After the new CPEs are deployed, verify that the CPEs register with the Agile Controller-Campus to automatically obtain service configurations for restoring services.
Translation
Download
Updated: 2019-03-04

Document ID: EDOC1100036696

Views: 18040

Downloads: 116

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next