No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Typical Configuration Examples

SD-WAN V100R018C00

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Security Policy for Hub Sites

Configuring a Security Policy for Hub Sites

Related Products

Agile Controller-Campus: V300R003C00

AR: V300R003C00

Networking Requirements

Figure 1-27 shows the SD-WAN networking of Enterprise A. To ensure security of network services at hub sites, intranet users must be restricted from accessing social media and video sharing websites.

Figure 1-27 Enterprise networking

Solution Design

Configure a URL filtering security policy at hub sites. Use predefined categories on the Agile Controller-Campus, set the filtering level to high and deny accesses to social media and video sharing websites.

Data Plan

Table 1-75 Security policy information

Item

Value

Policy name

test_security_policy1

Enable URL filter

Default action

Permit

Exception list

-

Use predefine url classification

ON

Predefined URL filter level

High

Site

Hub1, Hub2

Procedure

  1. Log in to the Agile Controller-Campus as a tenant administrator.
  2. Finish creating sites.
  3. Configure a security policy.

    1. Choose Configuration > Security Policy > URL.
    2. Select the VPN to which the sites to be configured belong.
    3. Click Create and set related parameters.

  4. Bind the sites to the policy.

    1. On the Security Policy page, click in the Operation column of the policy. In the Attach Sites dialog box that is displayed, select a site to be bound to the policy. Click and then click OK.

    2. Select the policy to be submitted, click Commit, and select Commit Selected.
    3. In the Commit dialog box that is displayed, set Effective time to Immediately and click OK.

Translation
Download
Updated: 2019-03-04

Document ID: EDOC1100036696

Views: 18089

Downloads: 116

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next