No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Typical Configuration Examples

SD-WAN V100R018C00

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Preferential Transmission of HTTP Services from Branch Sites to Hub Sites

Configuring Preferential Transmission of HTTP Services from Branch Sites to Hub Sites

Related Products

Agile Controller-Campus: V300R003C00

AR: V300R003C00

Networking Requirements

Figure 1-25 shows the SD-WAN networking of Enterprise A. The enterprise requires that HTTP services transmitted between Site4 and hub sites (using TCP port 8080) be preferentially transmitted.

Figure 1-25 Enterprise networking

Solution Design

QoS queue priorities are configured at Site4 and hub sites, and high-priority queues are configured to ensure that HTTP services are preferentially forwarded.

Data Plan

Table 1-69 Traffic classifier template information

Item

Value

Traffic classifier name

test_traffic_http

Source IP

-

Destination IP

-

DSCP

-

Type

L4

Protocol

TCP

Source Port

-

Destination Port

8080

Table 1-70 QoS policy information

Item

Value

Policy name

test_traffic_QoS

Traffic Classifier Template

test_traffic_http

Policy Priority

1

Queue Priority

Priority Level

Highest

Guaranteed bandwidth

Value: 3 Mbit/s

Site

Site4, Hub1, Hub2

Procedure

  1. Log in to the Agile Controller-Campus as a tenant administrator.
  2. Finish creating sites.
  3. Configure a traffic classifier template.

    1. Choose Configuration > Traffic Policy.
    2. Click Traffic Classifier Template. Click Create to create a traffic classifier template.
    3. Configure a traffic classification rule.

  4. Configure a QoS policy for the overlay network.

    1. Choose Configuration > Traffic Policy.
    2. Click QoS. On the QoS tab page, click Create and configure QoS policy.

    3. Bind the sites to the policy.
      1. On the QoS tab page, click in the Operation column of the policy. In the Attach Sites dialog box that is displayed, select a site to be bound to the policy. Click and then click OK.

      2. Select the policy to be submitted, click Commit, and select Commit Selected.
      3. In the Commit dialog box that is displayed, set Effective time to Immediately and click OK.

Translation
Download
Updated: 2019-03-04

Document ID: EDOC1100036696

Views: 17894

Downloads: 116

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next