No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Typical Configuration Examples

SD-WAN V100R018C00

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Centralized Internet Access Through LAN-side Internet Links of Hubs

Configuring Centralized Internet Access Through LAN-side Internet Links of Hubs

Related Products

Agile Controller-Campus: V300R003C00

AR: V300R003C00

Networking Requirements

Figure 1-19 shows the SD-WAN networking of Enterprise A. On this network, the hub sites connect to the Internet on the LAN side. The enterprise requires that both hub sites and branch sites access the Internet through Internet links on the LAN side of hub sites.

Figure 1-19 Enterprise networking

Solution Design

The tenant administrator has completed SD-WAN network configurations. There are reachable routes between CPEs at the active and standby hub sites and the Internet on the LAN side.

  1. Access the Internet in centralized access mode.
  2. In centralized access mode, traffic from branch sites to the Internet is forwarded to the hub sites through the overlay network. After CPEs at the hub sites receive the traffic, the CPEs forward the traffic to the Internet on the LAN side and forward the traffic from the Internet to branch sites through the overlay network.

Data Plan

Table 1-63 Site-to-Internet policy information

Item

Value

Centralized Internet access

Internet GW

Hub1, Hub2

Procedure

  1. Log in to the Agile Controller-Campus as a tenant administrator.
  2. Finish creating sites.
  3. Configure Internet access policies for the overlay networks.

    1. Choose Configuration > Traffic Policy.
    2. Click Site-to-Internet, and the Site-to-Internet page is displayed.
    3. Configure centralized Internet access.
      1. Enable Centralized Internet access and click .
      2. In the displayed Select Site dialog box, select the site that provides the Internet access gateway and click .
      3. Click OK.

    4. Click Apply Changes.

Translation
Download
Updated: 2019-03-04

Document ID: EDOC1100036696

Views: 18017

Downloads: 116

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next