No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R005 User Guide 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Architecture Design

Architecture Design

The X6800 uses the new-generation Huawei-proprietary system architecture.

The Architecture Design has the following features:

  • The 4 U chassis can hold server nodes of different widths and types.
  • All server nodes in an X6800 share the PSUs in 1 + 1 or 2 + 2 redundancy.
  • All fan modules in an X6800 share the fan modules in N + 1 redundancy.
  • The X6800 provides service and management ports from the front and service ports from the rear of the server.

Figure 2-22 shows the X6800 system architecture.

Figure 2-22 X6800 system architecture
Translation
Download
Updated: 2018-08-28

Document ID: EDOC1100036738

Views: 9408

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next