No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


X6800 Server V100R005 User Guide 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Flexible CMA

Installing a Flexible CMA


  1. Wear an ESD wrist strap or ESD gloves.
  2. Take the CMA out of the ESD bag, and raise the ejector lever.
  3. Align the CMA with the chassis slot and insert the CMA into the slot. See (1) in ‎Figure 3-12.

    Figure 3-12 Installing a CMA

  4. Tighten the two screws using a Phillips screwdriver to secure the CMA. See (2) in Figure 3-12.
  5. Lift the CMA until the ejector levers are fastened. See (3) in Figure 3-12.
Updated: 2018-08-28

Document ID: EDOC1100036738

Views: 9302

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next