No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


X6800 Server V100R005 User Guide 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting a High-Density Cable

Connecting a High-Density Cable

Introduction to a High-Density Cable

Use a high-density cable to connect a client or USB device to a server node in the chassis.

The server node provides a high-density port, which can be connected to a high-density cable. The high-density cable has the following connectors on one end:

  • One DB-15 VGA video connector
  • One RJ45 serial port
  • Three USB 2.0 (compatible with USB 1.1) ports
Figure 3-16 High-density cable


VGA connector (DB-15)


Two USB 2.0 port


Serial port (RJ45)


One USB 2.0 ports


High-density connector (connected to the high-density port on a server node)




  1. Wear an ESD wrist strap or ESD gloves.
  2. Hold down the tabs on the high-density connector on a high-density cable. See (1) in Figure 3-17.

    Figure 3-17 Connecting a high-density cable

  3. Align the connector with the high-density port on the server node panel, and insert the connector into the port gently. Ensure that the high-density cable is securely connected. See (2) in Figure 3-17.
Updated: 2018-08-28

Document ID: EDOC1100036738

Views: 9858

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next